Photogrammetry and Computed Tomography Point Cloud Registration Using Virtual Control Points

Abstract

Abstract. In this paper we propose a virtual control point based method for the registration of photogrammetry and computed tomography (CT) data. Because of the fundamentally different two data sources, conventional registration methods, such as manual control points registration or 3D local feature-based registration, are not suitable. The registration objective of our application is about 3D reconstructions of gyroscopes, which contain abundant geometric primitives to be fitted in the point clouds. In the first place, photogrammetry and CT scanning are applied, respectively, for 3D reconstructions. Secondly, our workflow implements a segmentation after obtaining the surface point cloud from the complete CT volumetric data. Then geometric primitives are fitted in this point cloud benefitting from the less complex cluster segments. In the next step, intersection operations of the parametrized primitives generates virtual points, which are utilized as control points for the transformation parameters estimation. A random sample consensus (RANSAC) method is applied to find the correspondences of both virtual control point sets using corresponding descriptors and calculates the transformation matrix as an initial alignment for further refining the registration. The workflow is invariant to pose, resolution, completeness and noise within our validation process.

Characterizing Low-cost Registration for Photographic Images to Computed Tomography

“…Shilov et al use SfM to construct surfaces of feet 19 . Zhan et al propose a method for registration of pointclouds obtained from photogrammetric data and CT of a directional gyro 20 . However, methods for obtaining anatomically accurate surfaces of soft tissue with sub-millimetric precision require expensive or specialized hardware, such as Holocreators (https://holocreators.com/) and 3Dmd (https://3dmd.com/) hardware.…”