Photocatalytic NOx Removal in Bismuth-Oxyhalide (BiOX, X = I, Cl) Cement-Based Materials Exposed to Outdoor Conditions

Abstract

Cement-based materials modified with 3D BiOX (X = I, Cl) microspheres at different percentages (1, 5 and 10% by weight of the cement binder) were prepared to investigate the durability of the photocatalytic NOx removal under outdoor conditions. Weathering—corresponding to a period of 13 months outdoors—was studied in terms of NO removal efficiency under visible and UVA light irradiation for BiOI and BiOCl mortars, respectively. Following this period, the samples were protected from the environment for four years, and NOx removal and selectivity to nitrates were assessed. BiOI and BiOCl mortar samples were initially photocatalytically active; NOx removal performance increased as BiOX content increased. There was good photocatalyst dispersion, and compressive strength was not significantly impacted. The BiOI mortars had nearly completely lost their activity after 5 years from casting, whereas mortars containing 10% BiOCl had maintained about 7% of initial performance. The results suggest that mortar deactivation is due to surface dirt and nitrates accumulation from NOx oxidation on the surface rather than carbonation. An internal self-deactivation mechanism that affects BiOI in mortar matrix has also been postulated.