Phase field modeling of ductile fracture with isotropic hardening and radius return method

Abstract

Phase field model has been investigated for brittle fracture in many static and dynamic scenarios, but its applications to ductile fracture is not as common as brittle fracture, especially implementing in software LS-DYNA with explicit scheme. In this study, an efficient LS-DYNA implementation of the phase field modeling of ductile fracture is presented, and both with and without the split of elastic strain energy have been considered for the damage evolution. In more detail, plasticity formulation of ductile material with isotropic hardening is briefly presented first, and then the governing equations of the classical phase field model are derived, which gives the displacement-phase coupled problem. For with the split of elastic strain energy, the shear component of elastic strain energy is considered for the damage evolution. The influence of degradation function on stress-strain curve is also investigated by using three kinds of function (polynomial function, algebraic fraction function, and sigmoid function), which leads to linear and nonlinear finite element method (FEM) formulation of the phase field model, and Newton-Raphson method is used to solve the nonlinear FEM formulation of the phase field model. A tensile bar test shows the influence of critical energy release rate and degradation function on stress-strain curve. Mode Ⅰ failure of three-point bending test, Mode Ⅱ failure of single-edge notched plate, and mixed-mode failure of asymmetrical double-notched plate verify the proposed model in this study. From these simulations, with the split of elastic strain energy shows improvements on plastic deformation than without the split of elastic strain energy.