Performance of photocatalytic ozonation process for pentachlorophenol (PCP) removal in aqueous solution using graphene-TiO2 nanocomposite (UV/G-TiO2/O3)

Abstract

The aim of this study was to evaluate the efficiency of photocatalytic ozonation process using graphene-dioxide titanium nanocomposite in removing Pentachlorophenol (PCP) from aqueous solutions. In this study, nanocomposites with graphene to TiO 2 (G/T) ratios of 1:10 and 1:20 were synthesized by hydrothermal method, and its characteristics were assessed using various analyses, SEM, XRD, FTIR, TEM, BET and TGA. In this process, the effects of parameters including O 3 concentration (0.25-1.25 mg/L), nanocomposite concentration (50-500 mg/L), initial PCP concentration (10-100 mg/L), and time (10-60 min), were studied. The results showed that PCP removal efficiency was increased by decreasing solute concentration. Increasing nanocomposite dose to 100 mg/L was led to an increase in efficiency (99.1%), but then a decreasing trend was observed. Increasing the concentration of ozone, up to specific value, also enhanced the efficiency but then had a negative effect on process efficiency. Furthermore, the optimum ratio of the catalyst was determined to be 1:20. The highest efficiency of the process for initial pentachlorophenol concentration of 100 mg/L was obtained 98.82% in optimum conditions (catalyst dose of 100 mg/L and 60 min). It is concluded that the photocatalytic ozonation process using graphene-dioxide titanium nanocomposite had the highest efficiency in removal and mineralization of PCP.