Performance analysis of single phase interior permanent magnet synchronous generator

Abstract

This work presents the performance analysis of a single phase interior permanent magnet synchronous generator. The stator magneto motive force (MMF) waveform of the single phase winding function was developed. The mathematical model in phase variables by which the performance of the generator can be investigated under various operating conditions was developed. Self-excitation of the generator was achieved through pre-excitation by the permanent magnet in the rotor, and then regulated by connecting 30µF capacitor across the terminals of the stator winding. The performances of the generator under constant speed, constant capacitor value and varying power factor loads was investigated. The voltage build-up characteristics and dynamic loss of load performance was studied. The magnitudes of the output power, real power, load voltage and load current increases with increase in load power factors while the phase voltage, phase current, capacitor current and the reactive power decreases with increase in power factor loads. The generator has shown to be capable of stand-alone power source. Simulations were carried out using the Simulink® toolkit in MATLAB® software. APPENDIX: MACHINE PARAMETERS USED IN THE SIMULATION Number of poles = 2, Frequency, f = 50Hz, Capacitance of the Capacitor, C= 30µF, Stator Resistance Rs = 27.7Ω, Permanent magnet flux ϕ = 0.139Wb, Stator leakage inductance, Lls = 0.067H.

Performance analysis of single-phase interior permanent magnet synchronous motor

“…Experimental method was used to demonstrate the trade-off in the number of turns of main winding to that of auxiliary winding. The single-phase loading of an isolated three phase PM synchronous generator was considered by [24] and the single-phase characteristics with consideration of various power factors was presented in [25].…”