Performance Analysis of Nanofluid-based Photovoltaic Thermal Collector with Different Convection Cooling Flow

Abstract

Using solar energy through photovoltaic (PV) panels has excellent potential as an alternative energy source. However, the problem of high operating temperatures causing a reduction in work efficiency needs to be addressed. This study aimed to analyze the development of a cooling system to increase PV panels' electrical and thermal efficiency. The research involved analyzing the use of TiO2, Al2O3, and ZnO working fluids by adding 0.5 vol% to water in an active cooling method. The cooling system involved a rectangular spiral and a rectangular tube behind the PV panel. A solar simulator simulated solar radiation with intensity variations to analyze the cooling system's performance in different working conditions. The results showed that the heat exchanger with a nanofluid configuration reduced the panel temperature by 14 oC, which increased the electrical efficiency by up to 4.7% in the ZnO nanofluid. In the rectangular spiral configuration, the ZnO nanofluid reduced the panel temperature from 60 to 45 oC, increasing the Isc value from 2.16A to 2.9A and the Voc value from 21.5V to 23V. This resulted in a maximum power increase of the panel to 53W. Doi: 10.28991/CEJ-2023-09-08-08 Full Text: PDF

Annual performance evaluation of a hybrid concentrated solar–micro gas turbine based on off-design simulation

“…Furthermore, the economic viability of solar power plants is influenced by their real lifetime and performance. Despite manufacturers data, empirical evidence suggests that the actual lifetime of PV power plants [ 38 ] and their performance efficiency [ 39 ] falls short of expectations, particularly in regions with tropical climates. This discrepancy underscores the importance of robust and reliable energy generation systems, such as hybrid solar-MGT systems, which offer not only environmental benefits but also economic advantages through enhanced durability and performance.…”

“…This study partly contributed to a UKRI-funded project, “SolarTurbo-CHP”, to develop a semi-renewable, grid-independent micro combined heat and power system and to improve energy accessibility in remote locations [ 39 ]. The aim of this project was to develop an optimal system and operation and control strategies for such a system.…”

Efficient Charging of Aerosol Nanoparticles by Corona-needle Charger with Improved Design for Printing of Metallic Microstructures

“…On the other hand, to achieve high-speed printing of microor nanostructures, a significant amount of nanoparticles is required as building blocks (10). Functional nanoparticles are widely used both in the form of an aerosol (11,12) and in a colloidal solution (nanofluid) (13). However, increasing the concentration of particles also leads to higher losses due to Coulomb mutual repulsion (14).…”

Optimizing DC Microgrid Systems for Efficient Electric Vehicle Battery Charging in Ain El Ibel, Algeria

“…One study focused on improving the accuracy of state-of-charge predictions for lead-acid batteries, vital for prolonging battery life in renewable energy systems (5). Another research explored cooling PV panels using nanofluids, showing that ZnO nanofluids in a rectangular spiral configuration could significantly increase electrical efficiency (2). Additionally, the development of carbon-free gas diffusion electrodes with Ni and Co-based bifunctional electrocatalysts for zinc-air batteries was investigated, offering improved stability and efficiency for energy storage (7).…”