Performance Analysis of Data Transmission for Joint Radar and Communication Systems

Abstract

This paper investigates the problem of data transmission for the joint radar and communication systems (JRCSs). The performance of the JRCS is characterized by data throughput related to the radar echo data (RED) and communication data rate (CDR). Two spectral coexistence schemes are proposed based on the degree of spectrum sharing for radar and communication, i.e., the isolated subfrequency band (ISFB) and mix-used frequency band (MUFB) schemes. Firstly, the signals of radar and communication are operated on the isolated subcarriers, enabling the received signals to be processed independently and bringing the advantage of interference avoidance. Secondly, the signals of radar and communication can be jointly operated on the same subcarriers for the MUFB scheme, which enhances the spectrum efficiency. Unlike the ISFB scheme, the CDR of the MUFB scheme is maximized along with the interference from the radar signal, and meanwhile, the allocated radar power on each subcarrier is derived by maximizing the radar mutual information. Numerical results show that the MUFB scheme significantly improves the performance of data transmission over the ISFB scheme, and a significant performance gain in the data transmission can be achieved, compared to the average power allocation case.

Integrated Sensing and Communication in Distributed Antenna Networks

“…Based on the above considerations, for each sensing round of duration p ηT M ´tp q, we model the required fronthaul capacity for conveying the sampled and quantized echoes from a RRH to the CP as follows [9] C S " pR max ´Rmin qN b ∆Rp ηT M ´tp qW F pbits{s{Hzq.…”

Data Recovery Technology Based on Subspace Clustering

“…Data recovery and clustering are of great signi cance to the analysis of high-dimensional data [9][10][11][12][13][14]. Many highdimensional data usually exist approximately in low-dimensional subspaces, and the low rank prior of data becomes the key to e ective data recovery [15][16][17][18]. In cluster analysis, many data are usually modeled as coming from multiple cluster subspaces.…”