Perancangan Jaringan Fiber to the Home (FTTH) pada Perumahan di Daerah Urban (Fiber to the Home (FTTH) Network Design at Housing in Urban Areas)

Abstract

The evolution of communication network comes from the need for users to stay connected anytime and anywhere. Modernization of the network continues to be done to increase bandwidth capacity in order to obtain an increase in multimedia services, especially in urban areas. Of various transmission media, optical fiber is the best choice to support reliable communication networks. One of the optical fiber communication technologies is Fiber to the Home (FTTH). This study proposes FTTH network design with Gigabit Capable Passive Optical Network (GPON) technology aimed at housing in urban areas. The design uses aerial and duct-aerial cabling systems. The design analysis is carried out based on the parameters of the link power budget, rise time, Bit Error Rate (BER), components and costs required. The value of the power budget link for the uplink and downlink are -22.792 dBm and -23.120 dBm. The rise time value for uplink and downlink are 0.256 ns and 0.258 ns, while the BER value is 14.628 x 10-12. The calculation results show that the design meets the required parameters, hence, the proposed network can be implemented. For the cost components required by the aerial system, it is 11.56% less than of the ductaerial sistem.

Proses Perbaikan Data ODP (Optical Distribution Point) Tidak Sama dan Rename ODP Menggunakan UIM Tools Untuk Meluruskan Service di PT. TELKOM WITEL KARAWANG

“…Serat optik mampu mengirimkan data dari satu tempat ke tempat lain dengan sangat cepat dan dengan jumlah data yang sangat besar melalui suatu media berupa cahaya. Secara umum sistem komunikasi serat optik terdiri dari sumber cahaya yang berperan sebagai pemancar, serat optik yang berperan sebagai media transmisi, dan sensor optik yang berperan sebagai penerima [5]. Serat optik memiliki bentang lebih panjang dari 550 meter hingga ratusan kilometer, serat optik memiliki kekebalan terhadap interferensi elektromagnetik, serta dapat mengirimkan data dengan kecepatan lebih tinggi dari pada jenis alat lainnya [6].…”

Perancangan Jaringan Akses Pada Perumahan Menggunakan Teknologi Ng-Pon2 Dengan Algoritma K-Medoid Clustering

“…OLT merupakan perangkat penyedia interface antara sistem PON dengan penyedia layanan triple play. Perangkat OLT memiliki fungsi mengubah sinyal informasi yang awalnya berupa sinyal elektrik menjadi sinyal optik untuk kemudian ditransmisikan melalui kabel serat optic [2]. OLT ditunjukkan Gambar 2.…”

Fiber to The Home (FTTH) Network Design with Addition of Optical Distribution Point (ODP) Using the Branching Method

“…The increasing need for internet access and the increase in various types of multimedia services, an access network architecture that is able to deliver these services well is needed, namely the FTTH (Fiber to the Home) network architecture. FTTH or Fiber to The Home is an access network architecture technology that uses fiber optic as its main medium up to the customer's home [1][4] [5]. With the use of optical fiber as its main medium, FTTH technology has several advantages when Optical fiber is a transmission medium that uses light as a signal conductor.…”