Particle Swarm Optimization-Based Control for Maximum Power Point Tracking Implemented in a Real Time Photovoltaic System

Abstract

Photovoltaic panels present an economical and environmentally friendly renewable energy solution, with advantages such as emission-free operation, low maintenance, and noiseless performance. However, their nonlinear power-voltage curves necessitate efficient operation at the Maximum Power Point (MPP). Various techniques, including Hill Climb algorithms, are commonly employed in the industry due to their simplicity and ease of implementation. Nonetheless, intelligent approaches like Particle Swarm Optimization (PSO) offer enhanced accuracy in tracking efficiency with reduced oscillations. The PSO algorithm, inspired by collective intelligence and animal swarm behavior, stands out as a promising solution due to its efficiency and ease of integration, relying only on standard current and voltage sensors commonly found in these systems, not like most intelligent techniques, which require additional modeling or sensoring, significantly increasing the cost of the installation. The primary contribution of this study lies in the implementation and validation of an advanced control system based on the PSO algorithm for real-time Maximum Power Point Tracking (MPPT) in a commercial photovoltaic system to assess its viability by testing it against the industry-standard controller, Perturbation and Observation (P&O), to highlight its advantages and limitations. Through rigorous experiments and comparisons with other methods, the proposed PSO-based control system’s performance and feasibility have been thoroughly evaluated. A sensitivity analysis of the algorithm’s search dynamics parameters has been conducted to identify the most effective combination for optimal real-time tracking. Notably, experimental comparisons with the P&O algorithm have revealed the PSO algorithm’s remarkable ability to significantly reduce settling time up to threefold under similar conditions, resulting in a substantial decrease in energy losses during transient states from 31.96% with P&O to 9.72% with PSO.

PV Panel Model Parameter Estimation by Using Particle Swarm Optimization and Artificial Neural Network

“…In [45], the optimal MPP voltage is estimated by the PSO and P&O perturbation methods. In [46], the P&O method is used to excite the PV system for each particle and the optimal voltage for maximum power is estimated by the PSO method. The PV panel parameters are estimated by applying the PSO on the voltage and current time series [47] and the PV parameter obtained could be used for fault diagnosis.…”