OVR Stylus: Designing Pen-Based 3D Input Devices for Virtual Reality

Arc-Type and Tilt-Type: Pen-based Immersive Text Input for Room-Scale VR

“…Shown in Figure 6, an implementation of the open-source VR stylus (OVR Stylus) [28] was created to be used as a pen-like input device. A touch potentiometer slider runs down the tip end of the stylus body, with two buttons along the side.…”

“…A touch potentiometer slider runs down the tip end of the stylus body, with two buttons along the side. The button closer to the tip is mapped to confirming character selections in Tilt-Type and the second button, closer to the back, is mapped to toggling Figure 6: The OVR Stylus [28] used in the implementation. the alternative layouts.…”

“…In this section, we present the design and implementation details for two 3DUIs designed to take advantage of pen or stylus-shaped input devices like the OVR Stylus [28], LogitechVR Ink [37], or Massless Pen [12]. The interfaces were designed and tested for use in a stereoscopic four-wall VR CAVE display or with a Windows Mixed Reality HMD, but they are broadly applicable to any VR or AR display configuration.…”

“…After selecting a bin, the user slides their index finger forward or backward along the touch sensor available on many common VR/AR styluses (e.g. OVR Stylus [28], LogitechVR Ink [37], or Massless Pen [12]) to select a character within the bin. Releasing the touch sensor confirms the selection.…”

3D PCB Designing of Protecting Circuit Using Fusion 360

“…Morph sensor is a 3D electronic design software specially made for reforming sensor modules [2]. OVR Stylus is a 3D pen-based design software for virtual reality [3].…”