Optimum number of cascaded cells for high-power medium-voltage multilevel converters

Abstract

When power electronic systems are connected to the medium-voltage grid, often multilevel topologies consisting of a number of cascaded converter cells are considered. For a given grid voltage level, either few cells featuring semiconductors with high blocking voltage capability or many cells using lowvoltage semiconductors can be employed. This paper proposes efficiency/power density (η-ρ) Pareto analysis to comprehensively identify the optimum number of cascaded cells. Recent advances in silicon carbide (SiC) semiconductor technology point towards devices with blocking voltages exceeding 15 kV. The switching characteristics that hypothetical SiC devices would have to provide in order to realize a simple single-stage full-bridge converter competitive to a multilevel solution are derived and found to be impracticably fast. Furthermore, it is shown that reliability concerns arising with increasing number of cascaded cells can be mitigated by means of redundancy.

Lifetime-Based Power Routing in Parallel Converters for Smart Transformer Application

“…In literature works addressing the reliability of modular power converter structure can be found [5], and the findings support the thesis that The authors are with the Chair of Power Electronics, ChristianAlbrechts Universitt zu Kiel 24118 Kiel, Germany (e-mail: ma@tf.uni-kiel.de; vir@tf.uni-kiel.de; gibu@tf.uni-kiel.de; liserre@ieee.org. modular architectures allow increasing the efficiency.…”

A Harmonic Voltage Injection Based DC-Link Imbalance Compensation Technique for Single-Phase Three-Level Neutral-Point-Clamped (NPC) Inverters

“…For example, solid-state transformers (SST) and dc distribution systems, which are high voltage (HV) or medium voltage (MV) applications, essentially require the use of multilevel topologies [3][4][5][6][7]. In multilevel topologies, three-level neutral-point-clamped (NPC) inverters have been widely used in MV and HV applications.…”

Design Guidelines of Circuit Parameters for Modular Multilevel Converter with H-bridge Cell

“…Besides, the evaluation of the heat sink volume in IGBTs with the voltage rating of which varies from 600 V to 6.5 kV has been also discussed (29) . However, the formulae of the semiconductor losses in the H-bridge cell type MMC have not been thoroughly clarified.…”