Optimizing the Parameters of Zirconium Carbide and Rice Husk Ash Reinforced with AA 2618 Composites

Abstract

Stir casting was utilized to generate the composites. The AA 2618–10wt% zirconium carbide 10wt% rice husk ash hybrid composite had the highest hardness value. In comparison to pure AA 2618, it had a 72% increase. The rule of mixture was used to compute theoretical density, whereas the Archimedes rule was utilized to evaluate real density. For AA 2618, AA 2618/zirconium carbide, and rice husk ash hybrid composites, simple carbide inserts were used for turning. Surface roughness, metal removal rate, and tool wear were among the numerous responses examined. RSM was utilized to analyze and optimize the test outcomes. Feed rate was the most critical issue for surface roughness and material removal rate. Tool wear was shown to be most strongly controlled by tool speed, whereas metal removal rate was found to be least significantly influenced by the weight percent of reinforcement.

Retracted: Optimizing the Parameters of Zirconium Carbide and Rice Husk Ash Reinforced with AA 2618 Composites

“…Tis article has been retracted by Hindawi, as publisher, following an investigation undertaken by the publisher [1]. Tis investigation has uncovered evidence of systematic manipulation of the publication and peer-review process.…”