Optimizing fabrication and performance of liquid‐processed carbon nanotube photodetectors on various substrates

Abstract

Carbon nanotubes (CNTs) have attracted interest for optoelectronic applications due to their unique electronic and optoelectronic properties. In particular, Multi‐Wall (MW) CNTs film acts as perfect photo‐collector surface with the possibility to tune the absorbance by controlling the film thickness. In this work, we demonstrate two types of hybrid Si‐MWCNTs photodetectors. The MWCNTs are solution‐ processed and deposited on n‐silicon substrate covered by two different dielectrics (Si3N4 or SiO2). The MWCNTs/SiO2/n‐Si device is used here as reference, since the SiO2/Si system is the most widely investigated structure in microelectronics. The electrical and optical characteristics of the reference device are compared with the corresponding of our basic MWCNTs/Si3N4 /n‐Si device. The MWCNTs are deposited on the substrate with the drop casting technique. Optical performance of the SiO2 device is comparable to the Si3N4 device thus revealing a quite interesting response under UV illumination. The Si3N4 device exhibited a peak Equivalent Quantum Efficiency (EQE) of 57% at 3μW of source illumination power, thus demonstrating a superior performance as compared to the SiO2 device (EQE of up to 55%, which is also promising for future applications). This performance can be attributed to the great absorption in UV region of CNTs layer. Apart from this technological goal, we also investigated how MWCNTs/Si3N4 or MWCNTs/SiO2 heterojunctions perform using standard electrical characterization techniques and how the presence of the CNTs change the dielectric characteristics of both substrates.This article is protected by copyright. All rights reserved.