Optimization of the Ultimate Bearing Capacity of Reinforced Soft Soils through the Concept of the Critical Length of Stone Columns

Abstract

The objective of this paper is to develop an analytical equation based on the concept of the critical-length of columns in order to optimize the ultimate bearing-capacity of soft soils, supporting a strip footing and reinforced by a group of floating stone columns. Optimization procedure was performed on three-dimensional numerical models simulated on the Flac3D computer code, for various soft-soils with different undrained-cohesions (Cu=15–35kPa), reinforced by columns of varying lengths (L) and area replacement ratio (As=10-40%), considering different footing widths B. Obtained results indicate that the optimal bearing-capacity ratio (Ultimate bearing-capacity of reinforced soil/unreinforced soil) is reached for the column critical-length ratio (Lc/B) and increase with increase of the later ratio, depending on As and Cu. Analysis of results also showed that the optimal values of the bearing-capacity ratio in the reinforced soils remain bounded between the lower and higher values (1.28-2.32), respectively for minimal and maximal values of the critical-length ratio (1.1) and (4.4). Based on these results, a useful analytical equation is proposed by the authors, for the expression of the critical-length; thus ensuring an optimal pre-dimensioning of the stone columns. The proposed equation was compared with the data available in the literature and showed good agreement. Doi: 10.28991/cej-2021-03091737 Full Text: PDF

Numerical Analysis of a 3D Unit Cell Model for Soft Soil Reinforced with Different Granular Columns

“…The values of soil materials and geometric parameters used for the analysis are displayed in Table 2. They are selected according to the typical range adopted in the latest studies (Basu, 2009;Boumekik et al, 2021). The results are presented as the load-displacement curves and the parameters analyzed are the friction angle, Young's modulus, the column length and the encasement stiffness of the geotextile.…”

“…Currently, the reinforcement by a stone column is one of the techniques used to reduce the settlement and increase the bearing capacity of soft soil. The technique concept is to change 10-40% of the weak soil with a cylinder containing compacted granular material (Boumekik et al, 2021). Ordinary Stone Columns (OSCs) are constructed in soft soil to reduce settlement, as well as to improve and increase the bearing capacity (Han and Ye, 2001).…”

Numerical and Larg‐Scale Laboratory Study of Rock Column Groups in Sandy Soil Behavior Improvement

“…In the present study, each experiment was repeated twice to ensure the accuracy of the experiments performed. It is important to note that, before making the samples, the inner walls of the test box (device) were well impregnated with oil to minimize the friction of sandy soil with the surfaces of the device under test [23].…”

Stabilizers Effects Comprehensive Assessment on the Physical and Chemical Properties of Soft Clays

“…Another study conducted by Bunawan et al [10] states that limited efforts have been made to investigate and identify the failure behavior of a concrete column group [11]. A proper design of roads and airfield pavements requires an in-depth soil properties evaluation to determine suitability of soil [12]. e main aim of this research is to recommend the optimum specification of the reinforced soil-footing system.…”