Optimization of the dilute maleic acid pretreatment of wheat straw

Abstract

BackgroundIn this study, the dilute maleic acid pretreatment of wheat straw is optimized, using pretreatment time, temperature and maleic acid concentration as design variables. A central composite design was applied to the experimental set up. The response factors used in this study are: (1) glucose benefits from improved enzymatic digestibility of wheat straw solids; (2) xylose benefits from the solubilization of xylan to the liquid phase during the pretreatment; (3) maleic acid replenishment costs; (4) neutralization costs of pretreated material; (5) costs due to furfural production; and (6) heating costs of the input materials. For each response factor, experimental data were fitted mathematically. After data translation to €/Mg dry straw, determining the relative contribution of each response factor, an economic optimization was calculated within the limits of the design variables.ResultsWhen costs are disregarded, an almost complete glucan conversion to glucose can be reached (90% from solids, 7%-10% in liquid), after enzymatic hydrolysis. During the pretreatment, up to 90% of all xylan is converted to monomeric xylose. Taking cost factors into account, the optimal process conditions are: 50 min at 170°C, with 46 mM maleic acid, resulting in a yield of 65 €/Mg (megagram = metric ton) dry straw, consisting of 68 €/Mg glucose benefits (from solids: 85% of all glucan), 17 €/Mg xylose benefits (from liquid: 80% of all xylan), 17 €/Mg maleic acid costs, 2.0 €/Mg heating costs and 0.68 €/Mg NaOH costs. In all but the most severe of the studied conditions, furfural formation was so limited that associated costs are considered negligible.ConclusionsAfter the dilute maleic acid pretreatment and subsequent enzymatic hydrolysis, almost complete conversion of wheat straw glucan and xylan is possible. Taking maleic acid replenishment, heating, neutralization and furfural formation into account, the optimum in the dilute maleic acid pretreatment of wheat straw in this study is 65 €/Mg dry feedstock. This is reached when process conditions are: 50 min at 170°C, with a maleic acid concentration of 46 mM. Maleic acid replenishment is the most important of the studied cost factors.

Biomass processing into ethanol: pretreatment, enzymatic hydrolysis, fermentation, rheology, and mixing

“…A drawback is that some of the resulting sugars are degraded to known fermentation inhibitors furfural and hydromethylfurfural requiring a detoxification step. However, cellulose digestibility following the pretreatment is high (75%-100%) [18,[35][36][37], which makes it another widely used pretreatment option.…”

Peach and Cherry Agroindustrial Wastes: New and Economic Sources for the Production of Lignocellulolytic Enzymes

“…The excess of these substances could affect the microbial growth and the production of enzymes. 39 On the other hand; the efficiency of pretreatment methods depends on different factors such as composition of lignocellulosic wastes, chemicals, processing time, etc. 40,41 These parameters should be optimized in subsequent experiments for higher lignocellulolytic enzyme yields.…”

A New Biological Pretreatment Method for Enhancing Cellulase Performance

“…Organic acids which did not produce inhibitor such as furfural (from pentoses) and 5-hydroxymethylfurfural (HMF; from hexoses) may increase porosity and improves enzymatic digestibility, resulting in hemicellulose removal [5,6]. However, this sophisticated method also needs heating process at 130-170°C.…”