“…In operational mode, the endpoints of parameters can take any of values (5) or (6). But if the external action coefficients have the same signs, the lower deviations of parameters are evaluated by formulae (5) and the upper ones -by (6). When the values x α are positive ones, the nominal endpoints of parameters are determined by…”
Section: Assigning Tolerances When the Nomenclature Of Elements Has Bmentioning
confidence: 99%
“…This calculations requires in the first line to determining operational tolerances. This procedure is considered in [5].…”
Section: Assigning Tolerances When the Nomenclature Of Elements Has Bmentioning
confidence: 99%
“…At the first procedure step, the nominal deviation of output function is preset and the nominal deviation of elements is defined. The algorithm of this step is presented in [5].…”
Section: Choosing the Radioelementsmentioning
confidence: 99%
“…The method of shaping simplified interval models for non-linear output functions of electronic devices is offered in [4]. Such models allow bringing about the optimization of operational tolerances for parameters of elements of electronic devices taking into consideration the influence of external actions [5]. The interval methods of determining nominal tolerances, which are ensured in producing elements have not been developed by now.…”
The procedure of assigning the nominal tolerances is offered. The interval-structure models are used. The influence of exposures is taken into account. The maximum relative volume of tolerances is ensured. The possibility of selecting elements is taken into account.
“…In operational mode, the endpoints of parameters can take any of values (5) or (6). But if the external action coefficients have the same signs, the lower deviations of parameters are evaluated by formulae (5) and the upper ones -by (6). When the values x α are positive ones, the nominal endpoints of parameters are determined by…”
Section: Assigning Tolerances When the Nomenclature Of Elements Has Bmentioning
confidence: 99%
“…This calculations requires in the first line to determining operational tolerances. This procedure is considered in [5].…”
Section: Assigning Tolerances When the Nomenclature Of Elements Has Bmentioning
confidence: 99%
“…At the first procedure step, the nominal deviation of output function is preset and the nominal deviation of elements is defined. The algorithm of this step is presented in [5].…”
Section: Choosing the Radioelementsmentioning
confidence: 99%
“…The method of shaping simplified interval models for non-linear output functions of electronic devices is offered in [4]. Such models allow bringing about the optimization of operational tolerances for parameters of elements of electronic devices taking into consideration the influence of external actions [5]. The interval methods of determining nominal tolerances, which are ensured in producing elements have not been developed by now.…”
The procedure of assigning the nominal tolerances is offered. The interval-structure models are used. The influence of exposures is taken into account. The maximum relative volume of tolerances is ensured. The possibility of selecting elements is taken into account.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.