Optimization of cardanol oil dielectric-activated EDM process parameters in machining of silicon steel

Improvement of the interfaces and mechanical characteristics of kenaf/kraft paper natural fibre reinforced composite materials

“…The serrated impact energy is smaller than the uniaxial impact resistance 26 . This is the effort needed for crack nucleation inside the un-notched sample versus the toothed test piece, in which the cut-out defines the fracture as the dominant pressure-focused area, as well as the fracture toughness tending to reflect the necessary energy again for spreading a typically known fracture 27 . The incIncludingmpatibilizer reduces the notched toughness of an old copy paper composite coating and thus the amount of the compatibilizer available for uptake, but t. Still, the increase again for un-notched samples 28 .…”

Experimental investigations of heat ageing with chemical modification of hemp fiber elastic characteristics

“…This is related to the degradation of cellulose and -1complementor rings, in addition to the breakage of phenol-O4-alkyl-aryl ether connections. Preparation methods have a significant impact on improving the mechanical and physical properties of hybrids through improving the interface among composites 6 .…”

Effects of machining parameters on surface quality of composites reinforced with natural fibers

“…Piercing Tyvek blends, GFRPCs, and NFRCs with a diamond drill revealed that the feeding velocity (flow rate) and the cutting force contributed massively to the debonding impact 9 . Piercing flaxseed fiber-reinforced polysaccharide-based bio-composites with elevated metal (HSS) drills resulted in greater hole quality and less breakage 10 . This is because the HSS blade produced lower thrusting pressures 11 .…”