Optimised Design and Simulation Analysis of Longitudinal Flow Corn Cone Threshing Device

Abstract

Aiming at the high crushing rate and impurity rate of corn kernel machine harvesting in the Huanghuaihai region, a longitudinal flow conical variable pitch threshing device is designed, which adopts the combined threshing element of "plate teeth + ribs" and the combined threshing concave plate of "leftward round tube type + vertical round tube type". The cob model was established, and the force analysis of the cob threshing process was carried out, and the type of threshing drum and the installation angle of the threshing concave plate round tube were determined as the main influencing factors, and the collision force on the corn cob was taken as the test index. Using EDEM discrete element simulation software, simulation tests were carried out on different types of threshing drums and threshing concave plates with different installation angles of round tubes with corn cobs, and the better threshing method was finally determined: a conical threshing drum at a drum speed of 450 r/min, and a combination of left-facing round-tube-type+vertical round-tube-type threshing concave plates with an installation angle of 10° (front-sparse and back-dense type) were used. Compared with the vertical circular tube type threshing concave plate, the corn cob contact force decreased from 313.5N to 247.3N, which was optimal for threshing in the range allowed by the corn kernel destructive force.