Optimal design and performance analysis of coastal microgrid using different optimization algorithms

Abstract

Owing to the stochastic behavior of renewable energy activity and the multiple design considerations, the advancement of hybrid renewable energy-based microgrid (HREMG) systems has become a complex task. This study proposes a design optimization algorithm for the long-term operation of an autonomous HREMG along with the optimal system capacities. The investigated energy system comprises photovoltaic panels, wind turbines, diesel generators, and batteries. It aims to energize a remote coastal community with a daily load demand of 400 kWh in Marsa Matruh, Egypt. Since most studies utilize commercial tools in the design optimization procedure, the African vultures optimization approach (AVOA) is developed to find the optimal energy alternative and determine the optimal component’s capacity considering achieving the minimum energy cost and loss of power supply probability. Moreover, an adequate energy management strategy is suggested to coordinate the power flow within the energy system in which renewable energy sources are fully penetrated. To check the AVOA robustness and efficacy, its performance is compared with the HOMER Pro most popular commercial tool as well as with new metaheuristic algorithms, namely the grasshopper optimization algorithm (GOA) and Giza pyramid construction (GPC) under the same operating environment. The results revealed that the proposed AVOA achieved superior economic results toward the least net present cost ($346,614) and energy price (0.0947 $/kWh). Moreover, over 20 independent runs, the AVOA showed a better performance in terms of convergence and execution time compared to other tools/algorithms. The obtained findings could be a useful benchmark for researchers in the sizing problem of hybrid energy systems.

Enhancing Grid-Forming Converters Control in Hybrid AC/DC Microgrids Using Bidirectional Virtual Inertia Support

“…Microgrids can incorporate distributed generation, loads, and energy storage. Our utility grids predominantly employ AC, so AC microgrids have attracted substantial interest [14]. Since most DERs and common loads such as lighting and electric vehicles connect with DC, adopting a DC microgrid could improve energy conversion efficiency.…”