Optimal backstepping control of quadrotor UAV using gravitational search optimization algorithm

Abstract

Quadrotor unmanned aerial vehicle (UAV) has superior characteristics such as ability to take off and land vertically, to hover in a stable air condition and to perform fast maneuvers. However, developing a high-performance quadrotor UAV controller is a difficult problem as quadrotor is an unstable and underactuated nonlinear system. The effort in this article focuses on designing and optimizing an autonomous quadrotor UAV controller. First, the aerial vehicle's dynamic model is presented. Then it is suggested an optimal backstepping controller (OBC). Traditionally, backstepping controller (BC) parameters are often selected arbitrarily. The gravitational search algorithm (GSA) is used here to determine the BC parameter optimum values. In the algorithm, the control parameters are calculated using an integral absolute error to minimize the fitness function. As the control law is based on the theorem of Lyapunov, the asymptotic stability of the scheme can be ensured. Finally, several simulation studies are conducted to show the efficacy of the suggested OBC.

Flight parameters improvement for an unmanned aerial vehicle using a lookup table based fuzzy PID controller

“…In this work, essentials of quadrotor model dynamic are discussed. Details on the behavior and general dynamics of four propellers unmanned aerial vehicle can be found in large numbers of papers [17]- [21]. Figure 2 shows the different axes of motion of a quadrotor.…”

Adaptive proportional integral derivative deep feedforward network for quadrotor trajectory-tracking flight control

“…Besides, other works suggest the development of nonlinear methods to ensure UAV system stability. Among the latter, we can list the backstepping control approach [6], [7] and the sliding mode approaches [8], [9]. In addition, intelligent control strategies have been vastly used  ISSN: 2088-8708 Int J Elec & Comp Eng, Vol.…”

Backstepping Control of Drone

“…Hence, to control such a system, a backstepping method is the best choice [16,17]. Backstepping control is based on the Lyapunov stability principle of dynamic systems, and it is robust to parametric variation; thus, it ensures the stability of the system and gives good performances results.…”