Optical Sensors for the Detection of Trace Chloroform

Abstract

Optical thin film sensors have been developed to detect chloroform in aqueous and nonaqueous solutions. These sensors utilize a modified Fujiwara reaction, one of the only known methods for detecting halogenated hydrocarbons in the visible spectrum. The modified Fujiwara reagents, 2,2'-dipyridyl and tetra-n-butyl ammonium hydroxide (n-Bu4NOH or TBAH), are encapsulated in an ethyl cellulose (EC) or sol-gel film. Upon exposure of the EC sensor film to HCCl3 in petroleum ether, a colored product is produced within the film, which is analyzed spectroscopically, yielding a detection limit of 0.830 ppm (parts per million v/v or μL/L hereinafter) and a quantification limit of 2.77 ppm. When the chloroform concentration in pentane is ≥5 ppm, the color change of the EC sensor is visible to the naked eye. In aqueous chloroform solution, reaction in the sol-gel sensor film turns the sensor from colorless to dark yellow/brown, also visible to the naked eye, with a detection limit of 500 ppm. This is well below the solubility of chloroform in water (ca. 5,800 ppm). To our knowledge, these are the first optical quality thin film sensors using Fujiwara reactions for halogenated hydrocarbon detection.

A visible colorimetric sensor based on nanoporous polypropylene fiber membranes for the determination of trihalomethanes in treated drinking water

“…The data for the calibration curve developed is statistically significant, with very little percent deviation (±4.4%), which can be credited to the high sensitivity of the developed visible colorimetric membrane sensor. The deviation at low THM concentrations can be attributed the increasingly small amount of analyte (ppb-scale), which is lower than many recent water analysis sensors [40,41], but still maintains a high predictive ability.…”

Reversible Ultralong Organic Phosphorescence for Visual and Selective Chloroform Detection

“…In such a situation, the development of a chloroform sensor is of great necessity. Up to present, various materials as chemical probes have been tested and reported for chloroform detection, such as metal–organic frameworks, , nanocomposites, , carbon black, polymers, − and organic dyes. , Among these materials, most of them suffer from many drawbacks, such as low sensitivity, poor selectivity, nonrepeatability, (Table S1) etc. Therefore, it is desirable to develop a new probe with high sensitivity, excellent selectivity, and good repeatability, as well as simultaneously visual detection for chloroform.…”

Chemiresistive/SERS dual sensor based on densely packed gold nanoparticles

“…The development of optical sensors is still following an ascendant slope nowadays and ongoing efforts are made to get them more accurate, rapid, portable, and inexpensive. This is mostly due to the promising potential they present in application fields such as health care, food contamination, environmental safety and security, among others [ 1 ]. Today, a reliable type of optical sensor must be able to identify and quantify the investigated analyte, ideally by the use of a low-cost chip made by simple manufacturing procedures.…”