Operative calculation of electric power losses in the network with unknown parameters in AIMS EMA

Abstract

THE PURPOSE. The process of o n-line calculation of electricity losses in three phase distribution electric networks (DEN) with a voltage of a 0,4 kV, where monitoring of electricity losses (commercial accounting) is carried out by an automated information measuring system of electrici ty monitoring and accounting (AIMS EMA) is considered. The problem of operative detecting of unauthorized power take -offs in the DEN under condition of unknown values of parameters of the network equivalent circuit, i.e. resistances of its interpersonal sections, which can change significantly over time because of external climatic factors (temperature, humidity, etc.) is being solved. METHODS. The procedure of the proposed calculation can be implemented by the available means of AIMS EMA. It is based on simultaneous measurements for the same observation interval of effective values of current and voltage, active and reactive powers at the beginning of the DEN and at each subscriber. In the course of periodic measurements of these mode parameters, the initial data used in the proposed calculation are formed. RESULTS. The analysis of the known methods of solving this problem is carried out, their disadvantages are shown and the new methodology, which is based on a preliminary operative calculation of reliable values of the resistances of interpersonal sections, provided that unauthorized power take -offs are possible in DEN is presented. While solving, the conditions of equality of resistances of the phase and neutral wires within the interpersonal section of th e DEN are used. The proposed method makes available the implementation of the operative calculation of technical losses in DEN and the identification of the commercial losses (unauthorized power take -offs) in it, as well as a detailed analysis of subscribe r data in order to detect the location (coordinate) and the amount of unaccounted electricity. CONCLUSIONS. The proposed methodology can be used in existing AIMS EMA without the introduction of additional measuring means (functions).

The calculation algorithm of oil and gas production enterprise energy efficiency indicators

“…Как видно из рисунка, прямых измерений недостаточно для оценки УРЭ, формирования баланса электроэнергии и анализа потерь мощности [13]. Помимо неопределенности распределения мощности по отходящим присоединениям, существуют основные технологические процессы, которые требуют оценку УРЭ.…”