On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment

Abstract

Fused deposition modeling (FDM) process is an additive manufacturing technologywhere objects are manufactured in layers. In present days, FDM is commercially used to build prototypes, functional components however these parts majorly suffers from poor surface quality and dimensional accuracy even for basic part geometries. In the present paper, first the effect of part deposition orientation on surface finish and dimensional accuracy of FDM parts are studied. The part selected for this study is designed in such a way that different primitive geometric features at different directions are present. The parts are built at different orientations (0°, 15°, 30°, 45°, 60°, 75°, 90°) using acrylonitrile butadiene styrene P430 material and surface finish, dimensional accuracy are measured at different surfaces. Next, the FDM parts are post processed by cold vapor treatment of dimethylketone (acetone) and improvement in surface finish and change in dimensional accuracy are investigated. The results show that, surface finish of the components is greatly improved by this vapor treatment process with minimal variations in part geometric accuracy after the treatment.Downloaded by [University of Otago] at 01:16 25 July 2015 2

Enhancing dimensional accuracy of FDM based biomedical implant replicas by statistically controlled vapor smoothing process

“…Kuo and Mao [18] exposed FDM parts to acetone vapors and found excellent surface finish, minimal dimensional variation and increase strength. Similar results have been found by Garg et al [19] in case of different geometrical features with variable orientation angles.…”

An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study

“…Strength, roughness and geometric accuracy of the final manufactured parts depend on various process parameters such as contour width, raster angle, raster width, layer thickness, part orientation, air gap and machine settings [4]. Selection of optimum process parameters settings can improve the mechanical strength, surface roughness and geometric accuracy to considerable amount.…”

Experimental investigations for dimensional accuracy and surface finish of polyurethane prototypes fabricated by indirect rapid tooling: a case study

“…Four such models at the same FDM parameters have been fabricated to create multiple cavities in silicone mould. Although, FDM process has been implemented successfully to reduce the product build time and cost, but the surface quality and dimensional accuracy of the FDM prototypes suffer badly even for basic part geometries [23]. However, some of the researchers highlighted that chemical vapour smoothing (CVS) technique drastically improves the surface finish of FDM fabricated ABS replicas with minimal variation in part dimensions [24][25][26].…”