Obtaining Silicon Oxide Nanoparticles Doped with Fluorine and Gold Particles by the Pulsed Plasma-Chemical Method

This paper presents the results of the study on the development of a methodology for the production of pure amorphous silicon dioxide containing up to 99.8 wt.% of SiO2. As a starting material, a silica gel with a moisture content of up to 55 wt.% and an SiO2/AlF3 ratio of 4 was used. The silica gel was purified using alkaline and acidic solutions in concentrations ranging from 0.1 to 25 wt.%. The analysis of the experimental data allowed to identify the most suitable purification parameters of the starting material. The initial silica gel and the reaction products were studied using the methods of X-ray fluorescence, X-ray phase analysis, electron scanning microscopy, EDS microanalysis, and particle-size analysis. Amorphous silicon dioxide obtained according to the methodology developed by the authors forms agglomerates of spherical silicon dioxide particles up to 1 μm in size. Amorphous silicon dioxide was involved in the preparation of catalyst supports in order to consider the possibility of replacing part of the expensive raw material in the form of aluminum hydroxide. In the work, the characteristics of the addition of this amorphous silicon dioxide and the supports obtained from the traditionally used raw materials were evaluated.

show abstract

Obtaining Silicon Oxide Nanoparticles Doped with Fluorine and Gold Particles by the Pulsed Plasma-Chemical Method

Cited by 3 publications

References 31 publications

Identification and Quantification of Nanomaterials in Consumer Product

Identification and Quantification of Nanomaterials in Consumer Product

Identification and Quantification of Nanomaterials in Consumer Product

Production of Amorphous Silicon Dioxide Derived from Aluminum Fluoride Industrial Waste and Consideration of the Possibility of Its Use as Al2O3-SiO2 Catalyst Supports

Contact Info

Product

Resources

About