Numerical tool for the analysis of CTOD curves obtained by DIC or FEM

Abstract

Typically, the crack tip opening displacement (CTOD) is used only to quantify the crack closure phenomenon. However, more information about crack tip phenomena can be extracted from the CTOD curves, which can be used for a better understanding of fatigue crack growth. The main objective here is the development of a numerical tool for the automatic analysis of CTOD plots, which can be obtained either numerically using the finite element method (FEM) or experimentally using digital image correlation (DIC). The parameters extracted are the elastic and plastic CTOD in loading and unloading regimes, the corresponding load ranges, the crack opening and closure levels and the dissipated energy. This tool is expected to promote a fast and efficient analysis of DIC and FEM results, facilitating the implementation of CTOD analysis in the fatigue community. K E Y W O R D S crack tip opening displacement (CTOD), digital image correlation (DIC), fatigue crack growth, finite element method (FEM)

Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation

“…The load continues to rise in this section until the peak load value is reached, at which point the material's full loading capacity is reached. As the crack mouth opening displacement continues to increase and the load begins to decrease after the peak load level, the last part begins [30].…”