Numerical study on steel plate girders ‐ Intermediate transverse stiffeners axial force

Abstract

Transverse stiffeners are used in steel plate girders with slender webs to provide lateral support to the web along the span and thus increase the plate girder shear resistance. Furthermore, transverse stiffeners anchor the tension field, resulting in axial compression in the stiffener. Despite this, it is widely assumed that the design axial force provided by the FprEN 1993‐1‐5 [1] for the transverse stiffeners is significantly greater than that observed in experimental testing and numerical simulations.The results of 550 nonlinear numerical simulations of plate girders loaded in shear up to failure are presented. Shear resistance and axial stiffener forces are evaluated while the effects of a wide parameter range as web aspect ratio and thickness, flange‐to‐web area ratio, and steel grade are investigated. The numerical results are compared to the European standard design values. Finally, a statistical analysis of the set of results is presented.The numerical analyses show that the axial forces installed in the intermediate transverse stiffeners are significantly lower than those specified by FprEN 1993‐1‐5 [1].