Numerical Study of the Characteristics of Rotary Spool Orifice in Water Hydraulics

Abstract

The rotary control orifice, in which the relative angular openings are adjusted by the rotary motion of the spool, thus controlling the flow area and the flow passing through, is a basic control element of hydraulic control valve. It has several advantages, such as little minimal steady flow rate, good anti-contamination, small driving power, small opening and shutting shock, and etc., over the translational control orifice. The working medium is tap water. A model is developed and numerical studies are carried out to investigate the hydrodynamic characteristics of the rotary control orifice, including flow and pressure field, flow characteristics, flow torque. The relationships between the flow and the pressure drops, the efflux angle and the angular openings, the steady-state flow torque and the pressure drops as well as the angular openings are obtained. The results show that a) the orifice geometries have great effects on the efflux angle and the steady-state flow torque; b) Under the same openings and flow direction, the efflux angle is almost constant under different pressure drops. It is larger for meter-in flow than for meter-out flow and decreases with the increase of openings; c) The steady-state flow torque (including meter-in flowTsfinand meter-out flowTsfout) is proportional to the pressure drops and first increases and then decreases with the increase of openings, finally reaches zero at the fully opened position; d) The friction moment is proportional to the rotary speed so as the transient flow induced moment to the rotary acceleration. The in-depth study of the drag moment of rotary control orifice helps to design high performance rotary servo valve for robots. The in-depth study of the rotary control orifice provides a basis for developing high performance rotary control valve.

Research on Seawater Hydraulic Internal Ball Gear Pump

“…However, in terms of application, water hydraulic technology is still inferior to oil hydraulic and electric drive technologies. 27…”

“…However, in terms of application, water hydraulic technology is still inferior to oil hydraulic and electric drive technologies. 27 The underwater working tool system urgently needs a water hydraulic pump with a simple structure, high efficiency and light weight. At present, there are principally four types of water hydraulic pump: vane type, gear type, axial plunger type, and radial plunger type.…”