Numerical Simulation of the Smoke Distribution Characteristics in a T-Shaped Roadway

Abstract

This paper numerically analyzes the influence of heat release rate (HRR) and longitudinal ventilation velocity on smoke distribution characteristics in a T-shaped roadway when the fire source was located upstream of the T-junction. The back-layering length, critical ventilation velocity, smoke temperature, and CO concentration in the main and branched roadway were investigated and analyzed. The results showed that the ventilation velocity is the key factor influencing back-layering length, while the effect of HRR on back-layering length is gradually weakened as HRR increases. The critical ventilation velocity in the T-shaped roadway is higher than in a single-tube roadway, and the predicted model of dimensional critical ventilation velocity in a T-shaped bifurcated roadway is proposed. The correlation between average temperature (Z = 1.6 m) (both in the main roadway I and the branched roadway) and ventilation velocity fits the power function, and the variation in average temperature (Z = 1.6 m) according to HRR fits the linear formula. The relation between average concentration of CO (Z = 1.6 m) (both inside the main roadway I and the branched roadway) and longitudinal ventilation velocity follows the power relation, and the variation in average concentration of CO (Z = 1.6 m) according to HRR follows the linear function.