Numerical simulation of dynamic brittle fracture of pipeline steel subjected to DWTT using XFEM-based cohesive segment technique

Talemi, Reza

doi:10.3221/igf-esis.36.15

Cited by 12 publications

(3 citation statements)

References 9 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Currently, the ABAQUS Dynamic/Explicit solver does not support the use of XFEM. However, it has been shown in the author's previous studies that the Dynamic/Implicit solver can be used to overcome this issue Talemi, 2016).…”

Section: Finite Element Modellingmentioning

confidence: 99%

Hybrid fluid–structure interaction modelling of dynamic brittle fracture in steel pipelines transporting CO 2 streams

Talemi

Brown

Martynov

et al. 2016

International Journal of Greenhouse Gas Control

Self Cite

View full text Add to dashboard Cite

Using the proposed model, a study is performed to evaluate the rate of brittle fracture propagation in a real-scale 48 diameter API X70 steel pipeline. The model was verified by comparing the obtained numerical results against available semi-empirical approaches from the literature. The simulated results are found to be in good correlation with the simulations using a simple semi-empirical model accounting for the fracture toughness, indicating the capability of the proposed approach to predict running brittle fracture in a CO 2 pipeline.

show abstract

Section: Finite Element Modellingmentioning

confidence: 99%

Hybrid fluid–structure interaction modelling of dynamic brittle fracture in steel pipelines transporting CO 2 streams

Talemi

Brown

Martynov

et al. 2016

International Journal of Greenhouse Gas Control

Self Cite

View full text Add to dashboard Cite

show abstract

“…It is observed from the results of the fracture toughness testing of Al6061graphite [15] and Al6063-SiC [16] that Al6061-graphite composite has more fracture toughness values. Different authors [15][16][17][18][19][20][21] studied the different methods of the finite element techniques to determine the mechanical/fracture behavior of the materials. Experimental techniques on prototype provide information concerning the structure in the pattern of the experiment only.…”

Section: Introductionmentioning

confidence: 99%

Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade

Doddamani

Wang²,

Jinnah³

et al. 2021

Frattura Ed Integrità Strutturale

View full text Add to dashboard Cite

The main objective of the work is to study the fracture behavior of AA6061-graphite material using both experimental technique and finite element simulation by considering helicopter rotor blade as a case study. From the case study, it has been observed that the helicopter rotor blade, made of AA6061, has been failed at the threaded portion of the hole. Experimental fracture toughness is carried out using the compact tension specimens as per ASTM standard testing procedure. Modeling of compact tension specimens and the threaded portion of the bolt hole was utilized to analyze the fracture toughness using a simulation tool. From the results and the comparison, it is recommended to use AA6061-9wt% graphite material as a replacement of AA6061 in the application of main rotor blades of the helicopter.

show abstract

“…To calibrate the brittle fracture model data from lab-scale experiments i.e. CVN and DWTT of X70 pipeline steel at low temperatures has been applied (Talemi, 2016). Using the methodology developed i.e.…”

Section: In Terms Of the Brittle Fracture Model A Novel Approach Of mentioning

confidence: 99%

Techno-economic assessment of CO 2 quality effect on its storage and transport: CO 2 QUEST

Porter

Mahgerefteh

Brown

et al. 2016

International Journal of Greenhouse Gas Control

Self Cite

View full text Add to dashboard Cite

This paper provides an overview of the aims, objectives and the main findings of the CO 2 QUEST FP7 collaborative project, funded by the European Commission designed to address the fundamentally important and urgent issues regarding the impact of the typical impurities in CO 2 streams captured from fossil fuel power plants and other CO 2 intensive industries on its safe and economic pipeline transportation and storage. The main features and results recorded from some of the unique test facilities constructed as part of the project are presented. These include an extensively instrumented realistic-scale test pipeline for conducting pipeline rupture and dispersion tests in China, an injection test facility in France to study the mobility of trace metallic elements contained in a CO 2 stream following injection near a shallow-water qualifier and fluid/rock interactions and well integrity experiments conducted using a fully instrumented deep-well CO 2 /impurities injection test facility in Israel. The above, along with the various unique mathematical models developed, provide the fundamentally important tools needed to define impurity tolerance levels, mixing protocols and control measures for pipeline networks and storage infrastructure, thus contributing to the development of relevant standards for the safe design and economic operation of CCS.Dedication: This paper is dedicated to the memory of our friend and colleague, Dr. Robert M. Woolley, who made a significant input to the CO 2 QUEST project and whose expertise, commitment and support inspired many of those around him.

show abstract

Numerical simulation of dynamic brittle fracture of pipeline steel subjected to DWTT using XFEM-based cohesive segment technique

Cited by 12 publications

References 9 publications

Hybrid fluid–structure interaction modelling of dynamic brittle fracture in steel pipelines transporting CO 2 streams

Hybrid fluid–structure interaction modelling of dynamic brittle fracture in steel pipelines transporting CO 2 streams

Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade

Techno-economic assessment of CO 2 quality effect on its storage and transport: CO 2 QUEST

Contact Info

Product

Resources

About