Numerical simulation and structural optimization based on an elliptical and cylindrical raft wave energy conversion device

Abstract

In recent years, research on wave energy development and utilization has been a hot topic, and many scholars have intensively researched raft-type energy conversion devices. This paper considers an elliptical and cylindrical raft wave energy conversion device from the perspective of stability and bionics to determine the structural parameters that correspond to optimal energy conversion in a three-level sea state. This paper studies the theoretical wave energy capture efficiency of cylindrical floats by drawing an analogy from the theoretical model. In addition, this paper determines the float structural parameters corresponding to the optimum capture efficiency by formulating numerical simulations and optimizing the parameters, such as the axis ratio of the cross-section, the spacing, the draught, the number of floats, the length of the float, the height of float's center of gravity, and others. In the optimization process, these six parameters were briefly analyzed in reference to the design of the Pelamis. The length of the float and the axial ratio of the cross-section are the main factors affecting the capture efficiency of the device. Therefore, the optimization sequence of the six parameters was determined by first controlling the main factors and then controlling the other factors. Then, the values of all the parameters were determined. The structural parameters of the float were observed to significantly influence the energy capturing effect of the device, and its efficiency was increased by intelligently selecting the structural parameters. Finally, the structural parameters of the elliptical and cylindrical raft wave energy conversion device were determined by comparing the capture efficiency under five typical wave conditions (WT.1 to WT.5) in a three-level sea state.

Analysis of the energy-capturing characteristics of floats for point absorption wave energy generators

“…Scholars have conducted many research studies on the influencing factors of float energy capture characteristics. Liu [9], McCabe [10], Garcia-Teruel [11] and Dong [12] used finite element simulation analysis or algorithm optimization to analyze the influence of different float shapes on the float energy-capturing characteristics. Gao studied the wave absorption efficiencies and output powers of floats with different masses operating under the same conditions [13].…”

Structural optimisation based on a snake‐like wave energy convertor with magnetoelectric transducer

“…The comprehensive influence of these two factors on the power capture performance of the two-raft WEC was discussed based on these models. Dong et al [21] discussed elliptical and cylindrical raft WECs. The theoretical efficiency of the wave energy capture of cylindrical floats was got using the theoretical model, and then six parameters of the floating structural related to the best capture efficiency were determined.…”