Numerical Optimal Design of a Non-Overload Centrifugal Pump

Abstract

Shaft power characteristics of centrifugal pumps attract extensive attentions in order to improve the operating reliability of pumps. TS-50-32-250 type low specific speed centrifugal pumps are selected as the research subjects. Three parameters of impeller including blade outlet angle β2, outlet width b2 and wrapping angle of blade θ are selected for the impeller shape optimization. Maximum flow design method and non-overload design method are adopted to design 7 impellers. Numerical simulation with CFX 12.1 is used to reduce the cost and shorten the design period. The time-averaged Navier-Stokes equations of 3D steady flow in the pump are calculated by CFX 12.1 based on the standard k-ε turbulence model together with standard wall function. The structured grids of different qualities are used in unmodified impeller for comparison to confirm that the results are not influenced by the quality of mesh. The optimal impeller is obtained when β2, b2, θ are 18°, 7mm, 175°, respectively. The performances of NCPs at other working conditions satisfy the requirements of heads and efficiencies obtained from China National Standard. The shaft power reaches to 15 kW which is the power rating of the matched motor, at 1.45QR (35m3/h), showing that the non-overload performance of the pump is also significantly improved after modifying impeller geometries. Impeller 6 is considered as the optimal one and produced for experiments. Experiment results prove that it is effective and reliable to improve a non-overload pump’s performance by maximum flow design method and non-overload pump design method. The results provide a reference for increasing the efficiencies and heads of non-overload pumps at multiple operating conditions.

Effects of Turbulence Models on Flow Characteristics of a Vertical Fire Pump

“…Therefore, they are frequently employed for projects such as offshore platforms, urban drainage and storm water management, feedwater supply, and a variety of other applications. This increased desire for vertical long-axis fire pumps also results in higher expectations for their performance (Hu et al 2012;Yu 2014;Zhang et al 2021).…”