Numerical Investigation on the Residual Ultimate Strength of Central-Cracked Stiffened Plates under Tensile and Bending Loads Using XFEM

Abstract

The present paper aims to study the crack propagating behavior of a stiffened plate under tensile and bending displacement load loads. The extended finite element method (XFEM) is used to analyze the residual ultimate strength of stiffened plates with a central crack. The quasi-static crack growth process is simulated by software ABAQUS. The validity of the grid is validated by the plate with a central crack. The numerical method is validated by comparing the fatigue crack growth rate of the round compact tension specimen (RCT) results of the extended finite element with experiment values. Influential parameters, including the size of the stiffened plates, heights of the stiffeners is varied, and uniaxial tensile and four-point bending models are analyzed. The results show that ultimate strength is reduced by the action of tensile and bending loads. The bottom plate and stiffener are destroyed with crack propagation, successively. With the increase in stiffener height, the crack resistance will also increase, thus restraining the central crack growth of stiffened plates.

Strength of Ship Structures

“…Woloszyk and Garbatov [8] reviewed recent advances in the modelling and analysis of the strength of corroded ship structures. Liu et al [9] used the extended finite element method (XFEM) to investigate the residual ultimate strength of central-cracked stiffened plates subjected to tensile and bending loading conditions.…”