Numerical Investigation of Temperature
Distribution of Thermal Discharge
in a River-Type Reservoir

Coastal power stations use sea water as a coolant, releasing it back into coastal environments at a higher-than-ambient temperature. Due to the possible ecological impacts on sensitive coastal zones, thermal plume formed by warmer coolant waters needs to be monitored, which is typically done through field campaigns. This paper assesses the use of simulations and remotely sensed observations as complimentary methods to characterise plume behaviour for a chosen coastal power station located within an inter-tidal embayment. Simulations of the thermal plume for two main tide phases and associated sea current conditions are validated against the high-resolution satellite observations. Simulated plume temperatures are higher than the observed values, with the biggest difference of 2 °C. The direction of the simulated plume dispersion is in agreement with observations and depends on the strength and direction of sea currents associated with the phase of the tide. The plume stretches most at the surface with limited impact on the benthic temperatures.

show abstract

Characterising industrial thermal plumes in coastal regions using 3-D numerical simulations

Faulkner

Bulgin

Merchant

2021

Environ. Res. Commun.

View full text Add to dashboard Cite

show abstract

Determining the long-term impact area of coastal thermal discharge based on a harmonic model of sea surface temperature

et al. 2023

View full text Add to dashboard Cite

Coastal nuclear power plants discharge large amounts of warm cooling water, which may have environmental impacts. This study proposes a method for determining the long-term impact area based on the average distribution of sea surface temperate (SST) increases. Taking the Daya Bay Nuclear Power Plant as a case study, 101 TM/ETM+ images acquired from 2000 to 2013 were used to obtain SST products. Cross-validation with NR_2P products showed that the accuracy of the SST products, in terms of the systematic error, root-mean-square error, and mean absolute error of 1,000 randomly selected verification points, was all <0.3°C, while Willmott’s index of agreement values was all >0.7. An annual SST cycle harmonic model was established. The mean difference between the modeled and observed SSTs was −2.1 to 2.5°C with a standard deviation range of 0–1°C. The long-term impact area was extracted by the harmonic analysis method and multi-year average method for comparison. The following conclusions can be drawn: 1) with sufficient SST samples, the temperature distributions of the two methods are similar, with the multi-year average method giving less noise and clearer boundaries. 2) When SST data are lacking for some months, the mean and standard deviation of the percentage of pixels belonging to areas of different temperature rise were calculated. The standard deviations of the two methods were both <0.04 in the temperature-rise classes of 1–2, 2–3, 3–4, and 4–5°C, while in the 0–1°C class, the standard deviation of the multi-year average method was 0.461, which is much higher than that of the multi-year average method (0.098). Performing statistical analysis on all pixels of >0°C, the multi-year average method had a standard deviation of 0.506, while the harmonic analysis method had a value of 0.128. Overall, the harmonic analysis method makes it possible to obtain and evaluate the long-term stability impact area of the thermal discharge over a period of time comprehensively and quantitatively. Even though it introduces a small amount of noise, it has less dependence on the input SST products and could improve the stability and reliability of thermal discharge monitoring, providing technical support for precise pollution control.

show abstract

Numerical Simulation Calculation of Thermal Discharge Water Diffusion in Coastal Nuclear Power Plants

Zhang,

Shi,

Zhan

et al. 2023

Atmosphere

View full text Add to dashboard Cite

Coastal areas have become the primary location for nuclear power plant sites due to the convenience of seawater cooling. In China, the diffusion range of thermal discharge water has always been a hot research topic as the basis for sea use areas. The main physical process of heat loss in the numerical simulation of thermal discharge from power plants is heat exchange between the water surface and air. Currently, the methods for calculating this heat loss include the heat flux method and the water surface heat exchange coefficient method. Taking a power plant in Zhejiang as the research object, the MIKE 3 temperature–salinity module (heat flux method) and MIKE ECO Model (water surface heat exchange coefficient method) were used for modeling, and the diffusion of thermal discharge water under different modules was compared and analyzed. The results show that the calculated area of the water temperature rise envelope between the two modules differed significantly under the same conditions. The surface 4 °C temperature rise area, as calculated using ECO Model, was 45.8% smaller than that of the temperature–salinity module. The MIKE 3 temperature–salinity module can simulate the heat accumulation of water under thermal buoyancy, producing a significant thermal stratification phenomenon; the ECO module does not accurately represent the heat exchange process between the water surface and the air, and it does not adequately capture the significant vertical stratification that occurs in real-world scenarios. On this basis, this study not only lays a foundation for further exploring the impact of thermal discharge water from this powerhouse on the structure of surrounding marine biological communities and dissolved oxygen content in water bodies but also provides scientific evidence for the selection of modules when simulating thermal discharge water with the MIKE model.

show abstract

scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.

Contact Info

hi@scite.ai

10624 S. Eastern Ave., Ste. A-614

Henderson, NV 89052, USA

Blog Terms and Conditions API Terms Privacy Policy Contact Cookie Preferences Do Not Sell or Share My Personal Information

Made with 💙 for researchers

Part of the Research Solutions Family.

Numerical Investigation of Temperature Distribution of Thermal Discharge in a River-Type Reservoir

Cited by 3 publications

References 24 publications

Characterising industrial thermal plumes in coastal regions using 3-D numerical simulations

Characterising industrial thermal plumes in coastal regions using 3-D numerical simulations

Determining the long-term impact area of coastal thermal discharge based on a harmonic model of sea surface temperature

Numerical Simulation Calculation of Thermal Discharge Water Diffusion in Coastal Nuclear Power Plants

Contact Info

Product

Resources

About