Numerical investigation of micellar-polymer displacement of oil from layered strata

Нигматулин, Р. И.; Федоров, К. М.; Khabeev, N. S.

doi:10.1007/bf01091247

Cited by 1 publication

(6 citation statements)

References 7 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The pore space of this layer was initially saturated with water and oil (s 0 10 = 0.26), whose viscosities were μ w = 1 and μ oil = 6, respectively. The curves of the relative phase permeabilities for the joint filtration of water and oil are the same as in [3][4][5].…”

Section: Results Of Numerical Simulation Of Micellar-polymer Extractimentioning

confidence: 99%

“…The model for the reservoir and the characteristics of the micellar-polymer flooding are the same as in [3][4][5]. The boundary condition on the pressure on the segments AC and DF (see Fig.…”

Section: Results Of Numerical Simulation Of Micellar-polymer Extractimentioning

confidence: 99%

“…A mathematical model for micellar-polymer flooding is given in [3]. In [4], this model is extended to the case of nonuniform layered reservoirs, and in [5], to the case of pattern flooding in a well system.The present paper gives the results of a numerical study of micellar-polymer flooding based on models [3-5] for the case of a nonuniform layered reservoir.1. Oil Displacement from a Nonuniform Layered Reservoir with Specified Volume Flow Rate of the Injected Fluid.…”

mentioning

confidence: 99%

mentioning

confidence: 99%

“…The numerical calculations were performed for the following values of the hydrodynamic parameters of the reservoir system: residual phase saturations (s 0 1 ) * = 0.35 and (s 0 2 ) * = 0.173 and viscosities of the reservoir oil and water μ oil = 4 and μ w = 1. The curves of the relative phase permeabilities are the same as in [3][4][5]. Adsorption of surface-active substances (SASs) from the micellar solution by the porous skeleton was ignored, and absorption of the polymer was considered to obey Henry's law [6] with Γ = 0.3.…”

mentioning

confidence: 99%

See 4 more Smart Citations

Simulation of micellar-polymer flooding of a layered oil reservoir of nonuniform thickness

Khabeev

Inogamov

2008

J Appl Mech Tech Phy

Self Cite

View full text Add to dashboard Cite

The dynamics of oil displacement from a layered reservoir of nonuniform thickness consisting of two hydrodynamically connected layers of different absolute permeability is studied. Results of numerical calculations are given. The influence of the main determining factors on the oil displacement dynamics is studied.A promising method for increasing the reservoir production is micellar-polymer flooding [1]. Because of the low surface tension on the boundary of the micellar solution with the reservoir fluids, almost the entire oil is set in motion. The higher viscosities of the micellar solution and the injected spacer fluid bank (aqueous polymer solution) compared to the oil viscosity allow an increase in the displacement area.As is known, real oil reservoirs are nonuniform, one of the main types of nonuniformity of porous media is permeability variation across a section of monolithic reservoirs [1]. We consider the profile problem [2] in a two-dimensional region. A mathematical model for micellar-polymer flooding is given in [3]. In [4], this model is extended to the case of nonuniform layered reservoirs, and in [5], to the case of pattern flooding in a well system.The present paper gives the results of a numerical study of micellar-polymer flooding based on models [3-5] for the case of a nonuniform layered reservoir.1. Oil Displacement from a Nonuniform Layered Reservoir with Specified Volume Flow Rate of the Injected Fluid. We consider various flooding modes in increasing order of complexity.We first study oil displacement by water in an oil reservoir of nonuniform thickness consisting of two layers of different absolute permeability (Fig. 1). We solve the problem with a specified volume flow rate of the injected fluid Q(t). Let the filtration region be a square (l y = l x ). The parameters of the porous medium and the hydrodynamic parameters of the fluids (oil and water) being filtered are chosen as follows: (s 0 α ) * = 0, k α = (s 0 α ) 2 , μ α = const, and s 0 10 = 1. We also set Q(t) = 1, l x = l y = 1, and k (1) = 1. Figure 2 shows oil saturation isolines at the moment of injection of a water volume 0.2V pore , for uniform reservoir (k (2) = k (1) = 1) and nonuniform reservoir (k (2) = 6).Unlike in the uniform reservoir, the displacement dynamics in the reservoir of nonuniform thickness has the following features: in the high-permeability layer, the fluids move more rapidly, and although in the bottom low-permeability layer, the absolute permeability is the same as in the uniform layer, the fluids in it move more slowly. According to the problem formulation, the amount of the fluid injected into each layer is identical in the uniform and nonuniform cases. Therefore, the lower rate of displacement in the lower layer compared to that in the uniform layer is explained by the cross-flow of part of the fluid from this layer to the top layer. Hence, in the high-permeability layer, the filtration flux is higher. Nevertheless, with time, the displacement covers the entire zone of low permeability. In this case, ac...

show abstract

Section: Results Of Numerical Simulation Of Micellar-polymer Extractimentioning

confidence: 99%

Section: Results Of Numerical Simulation Of Micellar-polymer Extractimentioning

confidence: 99%

mentioning

confidence: 99%

mentioning

confidence: 99%

mentioning

confidence: 99%

See 3 more Smart Citations

Simulation of micellar-polymer flooding of a layered oil reservoir of nonuniform thickness

Khabeev

Inogamov

2008

J Appl Mech Tech Phy

Self Cite

View full text Add to dashboard Cite

show abstract

Numerical investigation of micellar-polymer displacement of oil from layered strata

Cited by 1 publication

References 7 publications

Simulation of micellar-polymer flooding of a layered oil reservoir of nonuniform thickness

Simulation of micellar-polymer flooding of a layered oil reservoir of nonuniform thickness

Contact Info

Product

Resources

About