Numerical investigation of heat transfer and friction characteristics for turbulent flow in various corrugated tubes

Abstract

Thermal and hydraulic characteristics of turbulent water flow in a transverse corrugated tube with various corrugation direction (inward/outward) and corrugation shape (triangle, curve, rectangle, and trapezoid) are numerically investigated. The axisymmetric model of corrugated tubes with 10 mm inner diameter was investigated by changing the geometrical parameters for Reynolds number ranging from 5000 to 61,000 and constant heat flux boundary condition. Structured, nonuniform grid system is applied. Momentum, continuity, and energy equations were treated by means of a finite volume method using the SIMPLE scheme with the k–ε turbulence model and enhanced wall treatment. The results reveal that corrugation direction and corrugation shape have perceptible effects upon the heat transfer in the form of Nusselt number ( Nu) and pressure drop in the form of friction factor (ƒ). The average Nu for (inward) trapezoidal, rectangular, curved, and triangular corrugation shapes are 52.61%, 50.12%, 47.82%, and 44.96%, respectively, higher than the smooth tube. The average Nu for (outward) trapezoidal, curved, triangular, and rectangular corrugation shapes are 48.31%, 45.72%, 41.23%, and 40.94%, respectively, which are higher than a smooth tube. The results reveal that both inward/outward curved and triangular roughness shape have the superior performance evaluation criterion than rectangular and trapezoidal. Turbulence kinetic energy contour shows the increase in heat transfer performance for all corrugated tubes compared with a smooth tube. Inward corrugated tube provides the highest turbulence kinetic energy along the tube length and, consequently, the highest heat transfer. In addition, inward corrugated tubes provide the highest values and homogeneity of the velocity distribution along the core of tubes.

Modification of rotary air preheater toward achieving extended life-span utilizing porous media approach: A case study

“…To obtain these parameters, CFD analysis of thermal and fluid flow of a single channel in all three layers of the Ljungström is performed. 43 Based on equation (6) the Reynolds number of the Ljungström flow varies between 2500 and 6000, consequently the flow regime is turbulent. In this equation, D h is the hydraulic diameter of matrix channels.…”

Numerical investigation and multi-criteria optimization of the thermal–hydraulic characteristics of turbulent flow in conical tubes fitted with twisted tape insert

“…Based on this description of the fluid flow, the three conservation equations of mass, momentum, and energy are required to solve the problem. Following the previously stated assumptions, the conservation of the mass equation is reduced to [1,42] where v i stands for the fluid velocity in the ith direction. The conservation of momentum equation is reduced to…”

“…Figure 10 shows high magnitudes of TKE near the walls in various tubes fitted with TTs, compared to empty tubes, especially for the case of the convergent tube. Increment of TKE through the fluid flow path is an indication of the intensity of flow mixing from near-wall regions to the core of the fluid zone, which directly reflects on the heat transfer enhancement [42,63]. This fluid mixing disrupts the thermal boundary layer and enhances the heat transfer performance as it maximizes the effective temperature difference of the heat transfer process.…”

Experimental and numerical thermal performance analysis with exergy destruction on nanofluid flow in tube with double strip helical screw inserts

“…Pua et al 44 used finned heat sinks to enhance the cooling capacity of miniature electronic cooling systems. Kood et al 45 analyzed thermal hydraulic characteristics of fluid flow in corrugated tubes at turbulent flow regime. Eiamsa-ard and Promthaisong 46 analyzed counter rotation vortex flows and heat transfer mechanisms in V-spirally corrugated a tube.…”