Numerical assessment of miniaturized cold spray nozzle for additive manufacturing

Abstract

Purpose Application of cold spray technology may exhibit significant benefits for the additive manufacturing process, particularly for producing intricate objects. To ascertain the feasibility of such an application, this paper aims to present a numerical investigation of the effect of scaling down a convergent-divergent (de Laval) nozzle, which is typically used in the cold spray industry, on the compressible flow parameters and thermal characteristics. Design/methodology/approach The Navier–Stokes equations and energy equation governing compressible flow are numerically solved using a finite volume method with a coupled solver. The conjugate heat transfer technique is used to couple fluid and solid heat transfer domains and predict the local heat transfer coefficient between the solid and fluid. The use of various RANS turbulence models has also been investigated to quantify the effect of the turbulence model on the simulation. Findings The numerical results reveal that the flow and thermal characteristics are altered as the convergent-divergent nozzle is scaled down. The static pressure and temperature profiles at any section in the nozzle are shifted toward higher values, while the Mach number profile at any section in the nozzle is shifted toward a lower Mach number. The turbulent kinetic energy at the nozzle exit increases with the scaling down of the nozzle geometry. This study also provides convincing evidence that the adiabatic approach is still suitable even though the temperature of the nozzle wall is extremely high, as required for industrial application. Results indicate that it is feasible to use the available capabilities of the cold spray technology for additive manufacturing after scaling down the nozzle. Originality/value The idea of adopting cold spray technology for additive manufacturing is new and innovative. To develop this idea into a viable commercial product, a thorough understanding of the flow physics within a cold spray nozzle is required. The simulation results discussed in this paper demonstrate the effect that scaling down of a convergent-divergent nozzle has on the flow characteristics in the nozzle.

Interaction and influence of a flow field and particleboard particles in an airflow forming machine with a coupled Euler-DPM model

“…The CFD method can analyze and display the phenomena that occur in the flow field, predict the performance in a short period of time and achieve the best design result by changing various parameters with low cost and high computational efficiency. Recently, the CFD method has been widely used in the wood and forestry field [ 15 – 17 ]. The drying process of wood particles is researched by coupling Discrete Element Method (DEM) and CFD models [ 18 , 19 ], and the combustion characteristics of the packed bed in the wood chip combustor can be calculated and studied by CFD based on the Euler-Euler method [ 20 , 21 ].…”