Numerical and experimental study on the static performance of externally pressurized thrust bearings lubricated with refrigerant gases

Abstract

Purpose Oil-free heat pumps that use the system refrigerant gases as lubricants are preferred for thermal management in future space applications. This study aims to numerically and experimentally investigate the static performance of externally pressurized thrust bearings lubricated with refrigerant gases. Design/methodology/approach The refrigerant gases R22, R410A and CO2 were chosen as the research objects, while N2 was used for comparison. Computational fluid dynamics was used to solve the full 3 D Navier–Stokes equations to determine the load capacity, static stiffness and static pressure distribution in the bearing film. The numerical results were experimentally verified. Findings The results showed that the refrigerant-gas-lubricated thrust bearings had a lower load capacity than the N2-lubricated bearings, but they presented a higher static stiffness when the bearing clearance was less than 9 µm. Compared with the N2-lubricated bearings, the optimal static stiffness of the R22- and CO2-lubricated bearings increased by more than 46% and more than 21%, respectively. The numerical and experimental results indicate that a small bearing clearance would be preferable when designing externally pressurized gas thrust bearings lubricated with the working medium of heat pump systems for space applications. Originality/value The findings of this study can serve as a basis for the further investigation of refrigerant gases as lubricants in heat pump systems, as well as for the future design of such gas bearings in heat pump systems for space applications.

Test and analysis of friction torque of double-row angular contact ball bearing under vacuum environment

“…Space bearing is the key part of space equipment, its importance cannot be ignored (Rong et al, 2021).…”

“…To ensure the smooth implementation of space projects, it is necessary to conduct environmental simulation tests on the ground for each part or the whole space equipment, and the test indicators involve many aspects such as mechanical properties, material properties and electronic circuit stability (Ding et al , 2022). Space bearing is the key part of space equipment, its importance cannot be ignored (Rong et al , 2021).…”