Numerical and Experiment Analysis of Sapphire Sandwich-Structure Fabry–Perot Pressure Sensor through Fast Fourier Transform and Mean Square Error Demodulation Algorithm

Abstract

Pressure sensors prepared from sapphire exhibit excellent characteristics, including high-temperature resistance, high hardness, and resistance to electromagnetic interference. A Fast Fourier Transform and Mean Square Error (FFT-MSE) demodulation algorithm was employed to demodulate a sapphire sandwich-structure Fabry–Perot (F-P) pressure sensor. Through simulation analysis, the experimental results indicated that the demodulation error of the air cavity length in the range of 206 μm to 216 μm was less than 0.0008%. Compared to single demodulation methods and combined demodulation methods based on FFT or Minimum Mean Square Error (MMSE), the method proposed in this work reduced the demodulation error by more than three times and increased accuracy by more than six times. The algorithm was utilized to demodulate the sapphire sandwich-structure F-P pressure sensor, and the test results indicated that the fitting error of the sensor was less than 0.025% within the pressure range of 0 MPa to 10 MPa. The repeatability error was less than 0.066%, the zero-point deviation was 1.26%, and the maximum stability deviation was 0.0063% per 30 min. The algorithm effectively demodulated the actual cavity length variation in the sapphire sandwich-structure F-P pressure sensor, providing a solution for the performance evaluation of the sapphire sandwich-structure F-P pressure sensor.