Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel

Sharma, Anuj Kumar; Singh, Rabesh Kumar; Dixit, Amit Rai; Tiwari, Arun Kumar

doi:10.1016/j.jmapro.2017.10.016

Cited by 111 publications

(31 citation statements)

References 30 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Like the idea coming from composite materials, the use of hybrid nanofluids (two or more different types of nanoparticles suspended in fluids) recently gains much attention due to better performance when compared to nanofluids [63][64][65], but the ratio of mixing and the types of nanoparticles will be continually studied and proven. On the one hand, the MQCL technique, the novel development of the MQL technique will be the future of modern machining processes.…”

Section: The Development Trend Of Nanofluidsmentioning

confidence: 99%

Micro/Nanofluids in Sustainable Machining

Duc¹

2018

Microfluidics and Nanofluidics

View full text Add to dashboard Cite

Micro/nanofluids are the recent alternative solutions for cooling lubrication that can be defined as the fluids containing microparticles or nanoparticles, which own superior lubrication and cooling characteristics. For these reasons, they have gained significant attention in industrial applications, such as automotive, machining, and biomedical industries. In this chapter, the authors mainly present the recent progress and applications of nanofluids in machining processes, as well as some initial researches about microfluids. Nanofluids provide an excellent media in cutting zone for enhancing the thermal conductivity and tribological characteristics. Therefore, they help to enhance the cutting performance by reducing the coefficient of friction, cutting temperature tool wear, and improving the surface quality. Moreover, the application of nanoparticles in vegetable oils, which are inherently nontoxic as well as biodegradable, gives them superior lubrication properties suitable for MQL application, especially for difficult-to-cut materials. The novel green technology definitely brings out many new solutions in machining practice.

show abstract

Section: The Development Trend Of Nanofluidsmentioning

confidence: 99%

Micro/Nanofluids in Sustainable Machining

Duc¹

2018

Microfluidics and Nanofluidics

View full text Add to dashboard Cite

show abstract

“…However, they have small enough to avoid obstruction and abrasion progress. When the nanoparticles are mixed with the fluids for a more extended period of time that facilitate a better heat transfer because the heat transfer will move through the particle's surface, they can increase the volume fraction of fluid, generating better performances for heat transfer [6,7].…”

Section: Introductionmentioning

confidence: 99%

Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: an intelligent approach

Gupta

Mia

Pruncu

et al. 2020

J Braz. Soc. Mech. Sci. Eng.

View full text Add to dashboard Cite

Recently, the urgency of improved machining performance and environmental sustainability has forced the manufacturer to seek for alternative cooling and lubricating agent/technique such as nano-fluid (NF)-assisted minimum quantity lubrication (MQL). In this context, the performances of aluminum oxide (Al 2 O 3), molybdenum disulfide (MoS 2) and graphite (C) NF-impinged MQL in turning of Ti alloy (grade II) using CBN tool were evaluated regarding the cutting force, cutting temperature and surface roughness. The cutting speed, feed rate, approaching angle and cutting conditions (i.e., NFs) were oriented following the Box-Behnken design-of-experiment. The experimental results showed that the graphite NF, compared to Al 2 O 3 and MoS 2 , revealed the lowest cutting force, temperature and roughness. Moreover, it is evident from SEM images that graphite NF revealed a smoother machined surface and tool profile. This smooth tool and workpiece surface profile can be accredited to graphite's role as a nano-lubricant and its breaking ability into smaller NFs under pressure. To make the study complete, the adaptive neuro-fuzzy inference system (ANFIS) was employed to predict, the response surface methodology (RSM) was used to mathematically model, and the composite desirability approach (CDA) was used to optimize the responses. A good agreement between the experimental and modeled observations was found; however, the ANFIS outperformed the RSM. Moreover, the analysis of variance exhibited that the cutting force and temperature were primarily influenced by the cutting speed and the surface roughness was afflicted mostly by the feed.

show abstract

“…Amrita et al [2] established that the use of MQL with graphite nanofluid decreased the surface roughness, temperature, cutting force and tool wear during turning on AISI 1040 when compared with flood cooling system. Sharma et al [47] examined the machining performance in turning of AISI 304 steel under MQL with alumina and MoS 2 as hybrid nanofluids. The study identified that cutting force, feed force and surface roughness were minimized with hybrid nanofluids when related to Al 2 O 3 nanofluid.…”

Section: Introductionmentioning

confidence: 99%

Performance of silver nanofluids with minimum quantity lubrication in turning on titanium: a phase to green manufacturing

Anandan

Babu²,

Muthukrishnan

et al. 2020

J Braz. Soc. Mech. Sci. Eng.

View full text Add to dashboard Cite

Nowadays industries are looking forward for a sustainable manufacturing. Nanofluid with minimum quantity lubrication is one technology in the areas of green manufacturing, which minimizes the pollution caused to the environments. The aim of this work was to examine the influence of silver nanoparticles-based cutting fluid with minimum quantity lubrication in turning on titanium (grade 2) by changing the environmental conditions. Taguchi's L 27 orthogonal array has been selected to execute the experimental trials. The responses considered are surface roughness, temperature and tool wear. The process parameters selected for this analysis were environment, cutting speed, feed and depth of cut. The principal component analysis was used to determine the optimal conditions in turning parameters. It was noticed that environment is the key parameter in defining the responses. Under optimal conditions, the surface roughness has been decreased by 89%, temperature has been reduced by 44% and wear on the tool has also been reduced. The tool wear and chip morphology were reviewed through scanning electron microscope for a complete study.

show abstract

Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel

Cited by 111 publications

References 30 publications

Micro/Nanofluids in Sustainable Machining

Micro/Nanofluids in Sustainable Machining

Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: an intelligent approach

Performance of silver nanofluids with minimum quantity lubrication in turning on titanium: a phase to green manufacturing

Contact Info

Product

Resources

About