Novel methods for preparing nanocrystalline SnO2 and Sn/SnO2 composite by electrodeposition

Growth and characterization of tin disulfide (SnS2) thin film deposited by successive ionic layer adsorption and reaction (SILAR) technique

“…(1)). Chang et al [14] has reported a similar reaction in which SnO 2 was deposited using SnCl 2 ·2H 2 O solution and the reacting ions were Sn 4+ . The SnS 2 films were thin; dark yellow-brownish in colour and well adhered to the substrate.…”

Investigation of Sn–Zn electrodeposition from acidic bath on EQCM

“…According to the EDS analysis the deposit was found to contain 22.73 wt% Sn, 66.12 wt% Zn and 11.15 wt% O. EDS results indicate that Sn are coated as Sn and SnO 2 on the electrode surface from acidic bath due to the oxidation. Since Sn 2+ ions are oxidized to Sn 4+ ions in acidic medium, tin is deposited on the surface as SnO 2 as well as Sn [11]. The formation mechanism of SnO 2 can be given as follows: Local mapping analysis of alloy component and analysis of its EDX spectra also showed the formation of Sn, Zn and SnO 2 on the surface.…”

Tin/Tinoxide (Sn/SnO2) Nanocomposites Thin Films as Negative-Electrode Materials for Li-Ion Batteries

“…Among Li-ion batteries anode materials, SnO 2 -based materials have become one of the promising candidates, as SnO 2 has high theoretical capacity, the environmental friendliness of its raw material processing and low cost. In theory, SnO 2 exhibit a rst discharge capacity of 1494 mAh g −1 and a reversible discharge capacity of 782 mAh g −1 [2]. In this study, tin/tinoxide (Sn/SnO 2 ) lms were produced by thermal evaporation and plasma oxidation as anode materials for Li-ion batteries.…”