Nonlinear fatigue damage accumulation and life prediction of metals: A comparative study

Zhu, Shibai; Hao, Yong‐Zhen; Correia, José Alberto; Lesiuk, Grzegorz; Jesus, Abílio M.P. De

doi:10.1111/ffe.12937

Cited by 74 publications

(75 citation statements)

References 45 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The residual life of the K417 alloy under LH loading path was estimated using the proposed and existing models . It should be pointed out that the physical materials of K417 at 750 and 850°C were introduced into the physics based model (Equation ) due to the lack of experimental data.…”

Section: Resultsmentioning

confidence: 99%

“…The predicted lives using the existing and proposed models [Colour figure can be viewed at wileyonlinelibrary.com]…”

Section: Resultsmentioning

confidence: 99%

“…Furthermore, the residual life of NiTi alloy under LH block loading was predicted using the proposed and existing models, as listed in Table . The proposed model gave the better residual life predictions when the residual fatigue property was significantly improved by the previous loading.…”

Section: Resultsmentioning

confidence: 99%

“…In addition, the experimental results of other materials, including Ti‐6Al‐4V, Al‐2024‐T42, 30CrMnSiA, 30NiCrMoV12, NiTi, GS61, ENAW6005, P335NL1, and 316 Steel, were utilized to validate the application of the proposed model. The tests results of the aforementioned materials under LH block loadings were listed in Table .…”

Section: Resultsmentioning

confidence: 99%

“…K‐R model accounted for the effect of loading sequence under multistage loading and did not require any material parameters. More recently, Zhu et al reported that the accumulated fatigue damage was changed with the differently applied stresses under variable amplitude loading. Zhu et al modified K‐R model by introducing a loading interaction factor:

\frac{n_{1}}{N_{f 1}} + \frac{n_{2}}{N_{f 2}} {(\frac{\ln ((), N_{f 2})}{\ln ((), N_{f 1})})}^{\frac{σ_{1}}{σ_{2}}} = 1

…”

Section: Nonlinear Damage Accumulation Modelsmentioning

confidence: 99%

See 4 more Smart Citations

Residual fatigue life prediction based on a novel damage accumulation model considering loading history

Shi

et al. 2020

Fatigue Fract Eng Mat Struct

View full text Add to dashboard Cite

The influence of prior low‐cycle fatigue (LCF) on the residual fatigue life was investigated experimentally. A Ni‐based alloy was cyclically loaded under stress‐controlled low‐high (LH) block loading. In the first loading step, low‐amplitude loading was performed with the stress amplitude of 283.5MPa at 710°C. Different cycles of preloading were performed, varying from 100 to 10 000. Subsequently, high‐amplitude fatigue loading was carried out with the stress amplitude of 315MPa at 800°C. Experimental results show that the previous loading was beneficial to the residual fatigue life when the consumed life fraction is below 0.2 and detrimental when the consumed life fraction is larger than 0.2. A novel nonlinear fatigue damage accumulation model was proposed to estimate the residual LCF life under LH loading path considering the effects of load sequence and preloading cycles. The proposed model provided a better life prediction than some existing models, such as Kwofie‐Rahbar model, Miner' rule, Peng model, and Ye‐Wang model. Lastly, this model was further validated using various materials under LH and high‐low block loadings.

show abstract

Section: Resultsmentioning

confidence: 99%

“…The predicted lives using the existing and proposed models [Colour figure can be viewed at wileyonlinelibrary.com]…”

Section: Resultsmentioning

confidence: 99%

Section: Resultsmentioning

confidence: 99%