Noise Exposure During Orthopaedics Surgery

Abstract

There is serious concern on noise hazard in operating theatre especially in the orthopaedics field that requires usage of many instruments. However, data on this noise exposure particularly in Malaysia is rather limited. This study was conducted as a pilot study to investigate the noise exposure in orthopaedics theatre in a hospital in Kuantan, Pahang in June 2011. Several different orthopaedics theatres involving procedures that use powered instruments were investigated. Time recorded noise exposures were taken using personal noise dosimeters throughout the surgeries worn by the surgeons. The peak noise level and the average noise exposure within 8 hours were determined, and compared with the available Factory and Machinery Act (Noise) standards. Six out of seven surgeries exceeded 140 dBA for peak sound levels. The average noise exposure within 8 hours was below 85 dBA in all cases. Although the average noise level did not surpass the stipulated guidelines, the peak level exceeding 140 dBA still carries risk for hearing loss. In conclusion, healthcare personnel in operating theatre were exposed to noise hazard for certain medical procedures. Hence, proper noise management should be implemented to protect them from noise-induced hearing loss while maintaining the success and efficiency of the surgeries.

Robotic-Assisted Surgery for Cadaveric Skull Opening: A New Method of Autopsy Procedure

“…The peak sound level in an operating theater may exceed 140 dBA. To reduce the intensity of the noise from bone surgery, the use of oscillating tip saw systems are preferred to oscillating saw blade systems ( Peters et al, 2016 ; Razali et al, 2017 ).…”

The Finite Element Analysis of en Zi Tan Aqueduct in Operation Period

“…The aqueduct is as an important part in the water diversion project, large number of research work has been carried out in all countries in the world (Hui 2017, Wahab andAdzmi 2017). Since 1850s, the construction of the aqueduct has been greatly developed from the design scheme and the construction technology (Jingyao 2013, Razali et al 2017. In 70s, in order to meet the needs of large flow and large-span aqueducts, the experience of mature bridge construction was absorbed.…”