Node formation mechanisms in acoustofluidic capillary bridges

Abstract

Using acoustofluidic channels formed by capillary bridges two models are developed to describe nodes formed by leaky and by evanescent waves. The liquid channel held between a microscope slide (waveguide) and a strip of polystyrene film (fluid guide) avoids solid-sidewall interactions. With this simplification, our experimental and numerical study showed that waves emitted from a single plane surface, interfere and form the nodes without any resonance in the fluid. Both models pay particular attention to tensor elements normal to the solid-liquid interfaces they find that; initially nodes form in the solid and the node pattern is replicated by waves emitted into the fluid from antinodes in the stress. At fluids depths near half an acoustic wavelength, most nodes are formed by leaky waves. In the glass, water-loading reduces node-node separation and forms an overlay type waveguide which aligns the nodes predominantly along the channel. One new practical insight is that node separation can be controlled by water depth. At 0.2 mm water depths (which are smaller than a ¼ wavelength) nodes form from evanescent waves. Here a suspension of yeast cells formed a pattern of small dot-like clumps of cells on the surface of the polystyrene film. We found the same pattern in sound intensity normal, and close, to the waterpolystyrene interface. The capillary bridge channel developed for this study is simple, low-cost, and could be developed for filtration, separation, or patterning of biological species in rapid immuno-sensing applications.