News from the BIPM laboratories: 2014

Arcos, José-Maria Los; Stöck, M; Wielgosz, Robert; Arias, F.; Milton, Martin

doi:10.1088/0026-1394/52/1/155

Cited by 1 publication

(1 citation statement)

References 5 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Several national metrology institutes have worked toward this goal and developed new national standards of absorbed dose to water for medium-energy x-rays. These include recent standards based on water calorimetry developed in the Netherlands (de Prez and de Pooter 2008), Germany (Krauss et al 2012), and France (Rapp et al 2013), as well as the upcoming ionometry-based standard developed at the Bureau International des Poids et Mesures located in Sèvres, France (Los Arcos et al 2015).…”

Section: Introductionmentioning

confidence: 99%

A graphite calorimeter for absolute measurements of absorbed dose to water: application in medium-energy x-ray filtered beams

et al. 2016

View full text Add to dashboard Cite

The Italian National Institute of Ionizing Radiation Metrology (ENEA-INMRI) has designed and built a graphite calorimeter that, in a water phantom, has allowed the determination of the absorbed dose to water in medium-energy x-rays with generating voltages from 180 to 250 kV. The new standard is a miniaturized three-bodies calorimeter, with a disc-shaped core of 21 mm diameter and 2 mm thickness weighing 1.134 g, sealed in a PMMA waterproof envelope with air-evacuated gaps. The measured absorbed dose to graphite is converted into absorbed dose to water by means of an energy-dependent conversion factor obtained from Monte Carlo simulations. Heat-transfer correction factors were determined by FEM calculations. At a source-to-detector distance of 100 cm, a depth in water of 2 g cm(-2), and at a dose rate of about 0.15 Gy min(-1), results of calorimetric measurements of absorbed dose to water, D(w), were compared to experimental determinations, D wK, obtained via an ionization chamber calibrated in terms of air kerma, according to established dosimetry protocols. The combined standard uncertainty of D(w) and D(wK) were estimated as 1.9% and 1.7%, respectively. The two absorbed dose to water determinations were in agreement within 1%, well below the stated measurement uncertainties. Advancements are in progress to extend the measurement capability of the new in-water-phantom graphite calorimeter to other filtered medium-energy x-ray qualities and to reduce the D(w) uncertainty to around 1%. The new calorimeter represents the first implementation of in-water-phantom graphite calorimetry in the kilovoltage range and, allowing independent determinations of D(w), it will contribute to establish a robust system of absorbed dose to water primary standards for medium-energy x-ray beams.

show abstract

Section: Introductionmentioning

confidence: 99%