New Technique Provides Better Low-Density-Cement Evaluation

Abstract

Ultra-lightweight cements have been used throughout the industry for many years as a specialty cement for application in areas of weak formations. Typical lightweight slurries use hollow ceramic microspheres or nitrogen and other low specific gravity materials to maintain light slurry densities while providing good compressive strength development. The one problem with these systems has been the evaluation of the job via sonic tools. This paper will introduce a new technique to allow an accurate interpretation of a sonic cement evaluation and will be demonstrated from laboratory model studies. Light cement evaluation studies show a statistical variance technique to be the preferred method of evaluation in its class. Standard methods of cement evaluation rely on the contrast in acoustic properties of materials behind pipe. The Cement Bond Log (CBL) acoustic amplitude is used to derive compressive strength. The ultrasonic tool uses acoustic impedance to derive compressive strength. However, in the process of lightening the cement slurry, the acoustic properties of the cement can approach the acoustic properties of a fluid. Modeled values were compared to measured values of various slurries from 16.4 lb/gal to 9.0 lb/gal, confirming the trend from high acoustic impedance contrast of a cement to a drilling fluid in the case of a 16.4 lb/gal slurry to a negative contrast in the case of a 9.0 lb/gal slurry. Situations can arrive where drilling mud will be displaced by a cement slurry of the same density. Standard cement evaluation techniques would not be able to identify the cement in this case because of a lack of acoustic impedance contrast. Another technique is available for low-density cement evaluation that identifies the cement from the fluid behind pipe by quantifying the other statistical variance of the acoustic impedance measurement. It will be demonstrated that there is a difference in the impedance measurement statistically between a solid crystalline cement and fluid, even though the absolute values are the same. Additional work will demonstrate the difference between designed lightweight cement with nitrogen and cement that has been subjected to gas migration.

Foamed Cement Applications in Oil Industry Based on Field Experience: A Comprehensive Review

“…These procedures will help reduce the costs of unnecessary remedial cementing that may occur when foamed or complex cements are evaluated incorrectly. 81 Harness et al 82 developed a method to differentiate foamed cement from fluid when both have the same impedance. The method uses SVP to distinguish between solid crystalline structures such as cement and fluid.…”

“…Harness et al 88 developed a method to differentiate foamed cement from fluid when both have the same impedance. The method uses SVP to distinguish between solid crystalline structures such as cement and fluid.…”

Drilling and Completion of Horizontal Wells in a Diatomite Formation-A Systematic Approach to Addressing Challenges

“…This software uses two processes on the ultrasonic data: (1) variance processing and (2) impedance curve generation. Also, to help in the evaluation, the use of the variance technique 12 is used on the cement bond-log (CBL) data. Both methods are processed and displayed for analysis.…”