New Polycaprolactone-Containing Self-Healing Coating Design for Enhance Corrosion Resistance of the Magnesium and Its Alloys

Gnedenkov, Andrey S.; Sinebryukhov, Sergey L.; Filonina, Valeriia S.; Ustinov, A. Yu.; Sukhoverkhov, Sviatoslav V; Гнеденков, С. В.

doi:10.3390/polym15010202

Cited by 33 publications

(16 citation statements)

References 52 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Corrosion current density and values of the corrosion rate are slightly changed compared to the impedance modulus measured at the lowest frequency. The discrepancy in the EIS and PDP data was shown in the previous work [ 80 ]. However, the HC-D-1 sample has the best protective properties according to EIS and PDP measurements ( Table 1 and Table 2 ).…”

Section: Resultscontrasting

confidence: 54%

“…Thus, further study of the properties and methods of applying biodegradable polymeric materials, as well as the possibility of their combination with other protective technologies, will significantly expand the use of magnesium and its alloys in biomedicine. Among other synthetic biopolymers, polycaprolactone (PCL) has excellent physicochemical properties [ 80 ], including biodegradability [ 81 ], biocompatibility [ 82 ], structural stability [ 83 ], low melting point, and elasticity [ 84 ].…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings

et al. 2023

Self Cite

View full text Add to dashboard Cite

The increase of corrosion resistance of magnesium and its alloys by forming the smart self-healing hybrid coatings was achieved in this work in two steps. In the first step, using the plasma electrolytic oxidation (PEO) treatment, a ceramic-like bioactive coating was synthesized on the surface of biodegradable MA8 magnesium alloy. During the second step, the formed porous PEO layer was impregnated with a corrosion inhibitor 8-hydroxyquinoline (8-HQ) and bioresorbable polymer polycaprolactone (PCL) in different variations to enhance the protective properties of the coating. The composition, anticorrosion, and antifriction properties of the formed coatings were studied. 8-HQ allows controlling the rate of material degradation due to the self-healing effect of the smart coating. PCL treatment of the inhibitor-containing layer significantly improves the corrosion and wear resistance and retains an inhibitor in the pores of the PEO layer. It was revealed that the corrosion inhibitor incorporation method (including the number of steps, impregnation, and the type of solvent) significantly matters to the self-healing mechanism. The hybrid coatings obtained by a 1-step treatment in a dichloromethane solution containing 6 wt.% polycaprolactone and 15 g/L of 8-HQ are characterized by the best corrosion resistance. This coating demonstrates the lowest value of corrosion current density (3.02 × 10−7 A cm−2). The formation of the hybrid coating results in the corrosion rate decrease by 18 times (0.007 mm year−1) as compared to the blank PEO layer (0.128 mm year−1). An inhibitor efficiency was established to be 83.9%. The mechanism of corrosion protection of Mg alloy via smart hybrid coating was revealed.

show abstract

Section: Resultscontrasting

confidence: 54%

Section: Introductionmentioning

confidence: 99%

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings

et al. 2023

Self Cite

View full text Add to dashboard Cite

show abstract

“…The formation of the base oxide coating was accomplished using a PC-controlled plasma electrolytic oxidation (PEO) unit. The specimens were treated in aqueous solution of 25 g/L Na 2 SiO 3 and 7 g/L NaF, employing a combined bipolar mode in two steps [6].…”

Section: Methodsmentioning

confidence: 99%

Hybrid Coatings for Active Protection against Corrosion of Mg and Its Alloys

et al. 2023

Self Cite

View full text Add to dashboard Cite

A novel approach to surface modification was developed to improve the corrosion performance of biodegradable magnesium alloys. Additively manufactured magnesium samples and Mg-Mn-based magnesium alloys were used in this study. This method involves the combination of plasma electrolytic oxidation to create a porous ceramic-like matrix, followed by treatment with protective biocompatible agents. The most efficient method for the PEO-layer impregnation using sodium oleate and polycaprolactone was selected and optimized. The correlation between the structure, composition, and protective properties of the hybrid coatings was established. The composition of the formed polymer-containing layers was established using XPS and Raman microspectroscopy. The presence of sodium oleate and its distribution across the coating surface was confirmed at the microscale. The corrosion-protection level of the hybrid layers was assessed using potentiodynamic polarization measurements, electrochemical impedance spectroscopy, hydrogen evolution testing, and gravimetry (mass-loss tests) in vitro. The oleate-containing polycaprolactone layers (HC-SO 0.1–2) demonstrated stable corrosion behavior even after 7 days of immersion in Hank’s balanced salt solution. The corrosion-current density and impedance modulus measured at a frequency of 0.1 Hz for the samples with hybrid coating after 7 days of exposure were equal to 5.68 × 10−8 A∙cm−2 and 2.03 × 106 Ω∙cm2, respectively. The developed method of surface modification demonstrates the coating’s self-healing properties. The effectiveness of employing hybrid anticorrosive bioactive PEO coatings for biomedical products made from magnesium and its alloys was demonstrated.

show abstract

“…Alternately, increasing and decreasing values of the impedance modulus measured at the lowest frequency for composite inhibitor-containing coatings can characterize the self-healing properties of the protective layers. Such wave-like line trend of changing |Z| f =0.1Hz was previously detected for the inhibitor-containing coatings formed on magnesium alloys and assigned as a self-healing effect [ 17 ].…”

Section: Resultsmentioning

confidence: 52%

“…Coatings obtained using plasma electrolytic oxidation (PEO) have excellent adhesion to a substrate (including aluminum and its alloys) [ 13 ]. These coatings are also characterized by ease of formation and a wide range of composition, microstructure, porosity, and roughness of the resulting layers, which was provided by varying the composition of the electrolyte and modes of the PEO process [ 14 , 15 , 16 , 17 ]. Many research groups used the PEO method to modify the surface of the aluminum alloys.…”

Section: Introductionmentioning

confidence: 99%

The Effect of Smart PEO-Coatings Impregnated with Corrosion Inhibitors on the Protective Properties of AlMg3 Aluminum Alloy

et al. 2023

Self Cite

View full text Add to dashboard Cite

The protective coating with a self-organized microtubular structure was formed using plasma electrolytic oxidation (PEO) on AlMg3 aluminum alloy in the tartrate-fluoride electrolyte. This protective layer was further modified using corrosion inhibitors of the azole group (1,2,4-triazole, benzotriazole) and polymer material (polyvinilidene fluoride, PVDF). X-ray diffraction analysis and scanning electron microscopy with energy dispersive spectroscopy were used to study the morphology and composition of the obtained oxide coatings. The presence of the inhibitor in the PEO-layer was confirmed using micro-Raman spectroscopy and X-ray photoelectron spectroscopy. The level of corrosion protection of formed coatings as well as the effect of loaded inhibitors on the anticorrosion efficiency was evaluated using electrochemical impedance spectroscopy (EIS) and localized scanning techniques (SVET/SIET). The coating impregnation with corrosion inhibitors of the azole group significantly improves the corrosion characteristics of the material. Impregnation of the base PEO-layer with 1,2,4-triazole during 24 h results in a 36 times increase in the impedance modulus measured at the lowest frequency (|Z|f=0.1Hz). Additional sealing of impregnated coating with polymer improves the corrosion stability of the treated material. On the base of the obtained data, the optimal way of protective inhibitor- and polymer-containing formation using surface treatment was suggested. The best barrier properties were established for hybrid coatings obtained by the immersion of a PEO-coated sample in 1,2,4-triazole solution for 24 h and following spraying the PVDF solution. The value of |Z|f=0.1Hz for this protective layer increased by more than two orders of magnitude in comparison with the base PEO-layer. The three-stage mechanism of corrosion inhibition of the sample with smart inhibitor-containing coating was established.

show abstract

New Polycaprolactone-Containing Self-Healing Coating Design for Enhance Corrosion Resistance of the Magnesium and Its Alloys

Cited by 33 publications

References 52 publications

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings

Hybrid Coatings for Active Protection against Corrosion of Mg and Its Alloys

The Effect of Smart PEO-Coatings Impregnated with Corrosion Inhibitors on the Protective Properties of AlMg3 Aluminum Alloy

Contact Info

Product

Resources

About