New EDM Generator Used for the Machining of 1.2363 and 1.2343ESR Steels

Abstract

The basic building block of any electric discharge machine is a generator, which ensures the operation of material separation itself. Not only the erosion rate and electricity consumption but also the quality of the machined surfaces depend on the design of the generator. These key factors for efficient machining have been investigated using a new energy-saving and powerful generator developed for the electric discharge machine (EDM) while machining 1.2363 and 1.2343ESR steels. In order to monitor and model the responses in the form of eroding rate and surface quality, a two-level half-factor experiment was performed with one replication at the corner points and two replications at the central points, for a total of 80 rounds. Both graphite and copper electrodes of sizes 10x10 mm and 100x100 mm were used for eroding and the influence of parameter settings: Open-voltage, Pulse current, Pulse on-time and Pulse off-time was monitored. It was found out that the shape of the electrode and Pulse current have the most significant effect on the erosion rate. The parameters Pulse current, Pulse on-time and their mutual interaction have the most significant effect on the surface topography. Statistically significant factors influencing the occurrence of defects turned out to be Pulse current, Pulse on-time and Material of workpiece, where it can be seen that the material 1.2343ESR is significantly less prone to the formation of surface defects.