Abstract:Birch and eucalyptus kraft pulps were treated with sulfite solutions in neutral conditions (pH 7) at 170 °C for 60 min and at 190 °C for 180 min. The pulps were analyzed for kappa number, viscosity, carbohydrate composition, and optical properties. Additionally, UV resonance Raman (UVRR) spectroscopy was applied to collect information on the contents of hexenuronic acid (HexA), lignin, and its phenolic hydroxyl groups. The sulfite treatments resulted in (i) depolymerization and partial dissolution of cellulose… Show more
Sodium sulphite pulping of Scots pine chips in the initial pH range of 7.5–9 was investigated at 180°C and 165°C (for 120–240 min), using chemical charges between 25 and 50% and anthraquinone (AQ) charges 0–0.2%. As a result, pulps with yields of 52–73% and kappa numbers of 35–106 were produced. Delignification was accelerated by higher Na2SO3 charges and temperatures, and by AQ addition, whereas the effect of initial pH was negligible. The high pulp yields at a given kappa number were attributable to high retention of hemicelluloses, especially that of galactoglucomannan. The relatively low viscosities of pulps were apparently caused by depolymerisation of cellulose by sulphite. The sulphonic acid groups in the pulps correlated well with the residual lignin content, although some sulphonation of polysaccharides may also be possible. The results indicate that pulping of softwood in buffer-free (without Na2CO3 and/or NaOH) sodium sulphite liquor may result in pulps with tailored characteristics.
Sodium sulphite pulping of Scots pine chips in the initial pH range of 7.5–9 was investigated at 180°C and 165°C (for 120–240 min), using chemical charges between 25 and 50% and anthraquinone (AQ) charges 0–0.2%. As a result, pulps with yields of 52–73% and kappa numbers of 35–106 were produced. Delignification was accelerated by higher Na2SO3 charges and temperatures, and by AQ addition, whereas the effect of initial pH was negligible. The high pulp yields at a given kappa number were attributable to high retention of hemicelluloses, especially that of galactoglucomannan. The relatively low viscosities of pulps were apparently caused by depolymerisation of cellulose by sulphite. The sulphonic acid groups in the pulps correlated well with the residual lignin content, although some sulphonation of polysaccharides may also be possible. The results indicate that pulping of softwood in buffer-free (without Na2CO3 and/or NaOH) sodium sulphite liquor may result in pulps with tailored characteristics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.