Natural Clay Modified with ZnO/TiO2 to Enhance Pollutant Removal from Water

Abstract

Raw clays, extracted from Bana, west Cameroon, were modified with semiconductors (TiO2 and ZnO) in order to improve their depollution properties with the addition of photocatalytic properties. Cu2+ ions were also added to the clay by ionic exchange to increase the specific surface area. This insertion of Cu was confirmed by ICP-AES. The presence of TiO2 and ZnO was confirmed by the detection of anatase and wurzite, respectively, using X-ray diffraction. The composite clays showed increased specific surface areas. The adsorption property of the raw clays was evaluated on two pollutants, i.e., fluorescein (FL) and p-nitrophenol (PNP). The experiments showed that the raw clays can adsorb FL but are not efficient for PNP. To demonstrate the photocatalytic property given by the added semiconductors, photocatalytic experiments were performed under UVA light on PNP. These experiments showed degradation up to 90% after 8 h of exposure with the best ZnO-modified clay. The proposed treatment of raw clays seems promising to treat pollutants, especially in developing countries.

Biopolymer Gellan-Gum-Based TiO2: A Green Alternative Photocatalyst Approach for Removal of Pollutants

“…Figure 3 shows the material's morphology; the TiO2 is distributed uniformly and in scales [38,39] and the EDS results. The granules can be attributed to the formation of TiO2 nanoparticles, characteristic of the anatase phase [40,41]. 1GGT presented a more excellent distribution of TiO2 particles and a larger crystalline size, a fact that is related to the greater surface area according to the BET and XRD results.…”

Recent Clay-Based Photocatalysts for Wastewater Treatment

“…The as-prepared composite material was used for the degradation of p-nitrophenol and fluorescein. The photocatalytic efficiency was studied under UV light irradiation, and the material exhibited excellent activity of about 90% removal over a time of 8 h and the efficacy was profound in the case of p-nitrophenol [91].…”

Heterogeneous Photocatalysis: A Solution for a Greener Earth

“…In the contribution of Mahy et al [10], raw clays, from Cameroon, were modified with semiconductors (TiO 2 and ZnO) to improve their depollution properties with the addition of photocatalytic properties. Cu 2+ ions were also added to the clay via an ionic exchange to increase the specific surface area.…”