Multiplexed sensing interrogation technique based on a flexibly switchable multi-passband RF filter by using a Solc-Sagnac loop

Abstract

In this paper, we have proposed and experimentally demonstrated a multiplexed sensing interrogation technique based on a flexibly switchable multi-passband RF filter with a polarization maintaining fiber (PMF) Solc-Sagnac loop. A high-order Solc-Sagnac loop can be used as a spectrum slicer as well as sensing heads, and a multi-passband microwave photonic filter (MPF) can be achieved together with a dispersive medium. Environmental parameter variations will cause a frequency shift of the corresponding passband of the MPF, so by employing only one Sagnac loop, it is possible to monitor several environmental parameters simultaneously. In this article, we have demonstrated and analyzed the performance of the flexibly switchable multi-passband MPF by using a second-order Solc-Sagnac loop. To demonstrate the temperature sensing capabilities of our interrogation system, we have applied temperature changes individually to Sensor Head 1 ( L P M F 1 ≈ 0.97 m ) only, Sensor Head 2 ( L P M F 2 ≈ 2.97 m ) only, and both Sensor Head 1 and 2 in the experiment. By monitoring frequency shift of the MPF’s passbands, the sensitivities for Sensor Head 1 and Sensor Head 2 have been estimated to be -0.275 ± 0.011 MHz/℃ and -0.811 ± 0.013 MHz/℃ respectively, which show a good sensing linearity and stability. By utilizing the longer length of the sensing PMF, higher sensitivity can be achieved. By using Solc-Sagnac loop with higher order, more sensors can be multiplexed.